768201
26
Zoom out
Zoom in
Previous page
1/48
Next page
6.0 MENU AND PICTURE SETTING
26 R699780 - Starlight User Manual
Reset values to their default settings.
6.3 Input Signal menu
HDMI Inputs
This menu is available if the selected active input is HDMI1 or HDMI2.
6.3.0.1 Input
Auto: The input dynamic range is automatically detected and configured.
Standard: Force dynamic range output to 16-235.
Enhanced: Force dynamic range output to 0-255.
6.3.0.2 Color Space
Auto: The source color space is automatically detected and configured.
YCbCr(4:4:4): Set color space to YCbCr 4:4:4.
YCbCr(4:2:2): Set color space to YCbCr 4:2:2.
RGB: Set color space to RGB 4:4:4.
6.3.0.3 Control with HDMI (CEC)
Off: By default the CEC communications are disabled.
On: Enables CEC communications to be sent to the projector through HDMI cable.
CEC: Consumer Electronic Control
Component
This menu is available if the selected active input is Component.
•Y Pb/Cb Pr/Cr: Select this option if the COMP. input is connected to a component video signal.
RGB: Select this option if the COMP. input is used with a RGB video source.
SCART: Select this option if the COMP. and VIDEO inputs are used together to receive RGB+Sync signals from
a European SCART source.
Video / S-Video
This menu is available if the selected active input is either Video or S-Video.
6.3.0.1 NTSC Setup level
This function can adjust the black level of the signal to 7.5 IRE instead of 0IRE. 7.5
IRE is widely used for NTSC standard.
6.3.0.2 Color System
This function allows a manual selection of the color system to be used between
NTSC, NTSC4.43, PAL, PAL-M, PAL-N and SECAM. The default setting is Auto.
When Auto is selected, the input format is automatically detected and the correct
color system is applied.
PC (StarLight2 only)
This menu is available if the selected active input is PC (Sub-D15) input.
•Auto Alignment: Automatically adjusts Tracking, Phase and Picture Position
•Tracking: Adjust the horizontal size and display area of the picture.
Phase: Adjust flickering and blurred pictures.
Picture Position: Adjust the display position of the picture.
Picture Position
Depending on your source, you may find that the picture should be adjusted into the screen, adjust the horizontal
and vertical position of the picture into the screen.
Some signals may not be fully displayed, adjust this setting properly when necessary.
Aspect Ratio
When watching a movie or video program, you can manually set the desired aspect ratio to fill your screen. Select
the correct aspect ratio depending on your source:
6.3.0.1 For Video sources
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision Star Light at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision Star Light in the language / languages: English as an attachment in your email.

The manual is 3,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info