768201
25
Zoom out
Zoom in
Previous page
1/48
Next page
6.0 MENU AND PICTURE SETTING
R699780 - Starlight User Manual 25
Normal: Standard tones
Gamma A: rich dark tones.
Gamma B: for film and movie projection.
Gamma C: for film and movie projection with more detailed blacks than setting B.
Gamma D: this setting is recommended for bright midtones and Computer like projection.
Custom1
Custom2
Custom3
The Custom data can be set to:
Correction Value: a unique value that will act as a gamma coefficient between 1.8 and 2.6.
Gamma Adjustment: the gamma curve can be adjusted for each color Red, Green and Blue.
Copy: copy the adjusted values to temporal memory.
•Paste: paste values stored in memory to current profile.
Reset: reset to the default 2.2 gamma coefficient.
Gamma Adjustment can be copied from all modes. Paste can only be used for Custom modes.
Advanced 6.2.0.1 Sharpness
The Sharpness function is used to adjust the image sharpness of the picture. Adjust
the Sharpness value between 0 (soft) and 100 (sharper).
6.2.0.2 Detail Enhancement
Detail Enhancement function is used to improve the picture quality. You can set it
from -50 to 50.
6.2.0.3 Noise Reduction (SD video only)
DNR: Digital Noise Reduction. You can set it from 0 up to 16 to reduce the image
noise.
MNR: Mosquito Noise Reduction function is used to reduce the Mosquito noise on
the picture, generally found in compressed digital video signals such as television
broadcast or encoded movies. Adjust the MNR value from 0 up to 16 to reduce the
typical broadcast picture mosquito noise
BNR: Block Noise Reduction uses a large portion of the picture to reduce the digital
noise, this ensures a higher quality filter. Adjust the BNR value to On or Off.
6.2.0.4 CTI (SD video only)
Color Transition Improvement. Set it to Off, Low, Middle or High to reduce the color
smear (color contour correction). Caution: this function may alter the original picture
chrominance.
6.2.0.5 Color Management (TSL adjustments for StarLight2 only)
The Color Management gives the installer an unique calibration ease with the
integrated Color Adjustment menu: each primary and secondary color can be
independently calibrated to obtain a precise color balance in a snap.
Adjust the Red, Green, Blue, Yellow, Cyan and Magenta Tints, Saturations and
Luminances and store them into Custom1, Custom2 or Custom3 profiles.
6.2.0.6 Crystal Motion Drive (120Hz)
The Crystal Motion function uses a 120Hz video processing to render a smooth and
clear motion for movies shot at 24Hz or HD movies at 60Hz. Set the correct level
between low and high for 1080p24Hz movies or Film mode input to obtain a clear
image.
Lens Aperture
The lens is equipped with a variable electronic aperture. This function is used to optically adjust the light output
depending on the viewing conditions and the light ambiance. Adjust from the correct aperture from partially closed
to fully opened.
Reset
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision Star Light at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision Star Light in the language / languages: English as an attachment in your email.

The manual is 3,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info