768191
11
Zoom out
Zoom in
Previous page
1/48
Next page
INSTALLATION GUIDELINES
R699900 - Eos Series User Manual 11
position.
Adjust the picture to your screen.
The Vertical Shift level is between -80% and 80% of the Screen Height (0.80 x H).
The Horizontal Shift level is between -34% and 34% of the Screen Base (0.34 x B).
If the projector is not installed perpendicularly to the screen, use keystone correction to fulll your screen.
Note that using keystone correction, may be disabled by 3D projection. If you want the best possible 3D
pictures, It is not recommended to use trapezoidal correction.
If you plan to use the vertical and horizontal shifts without keystone correction, make sure to not exceed the
values contained in the tab below for the Eos 1 and Eos 2:
Left / Right shift 0% 10% 20% 25% 30% 34%
max. up / down shift 80% 66% 47% 34% 18% 0%
The Eos Signature has an extended shift range as follow:
Left / Right shift 0% 10% 20% 25% 30% 35% 43%
max. up / down shift 100% 87% 72% 58% 45% 22% 0%
•Adjust the picture position
The projector has motorized vertical and horizontal shifts. Browse into the Menu to the [Lens Control] setting
into the Installation menu, select the shift adjustment. Or use the direct access button on the Remote Control
Unit [Lens Control] to make the lens adjustment. You can use self-generated test pattern of the projector or an
external pattern, from a calibration DVD by example, by setting the Adjust pattern option to Off.
•Adjust the picture Zoom
Into the [Lens Control] menu, press the [Ok] button to access the Zoom adjustment. Use the up and down buttons
to adjust the picture size until the screen is completely lled.
•Adjust the Picture Focus
From the [Lens Control] menu, press the [Ok] button to access the Focus adjustment. Use the up and down
buttons to adjust the picture focus
Using Installation Modes
You can save the current picture position, zoom and focus into one of the 10 Installation Modes. Each Installation
Mode uses a memory that stores the current position, zoom, focus of the lens. Additionally, you can set a custom
name of 10 characters or less.
•Current lens setup
All the lens settings will be stored by default into the Installation Mode 1. You can also copy a Mode into another
using the Mode Copy function. Menu > Installation > Installation Mode > Mode Copy. Then you can call back
anytime later the current lens setup using the direct access button [Mode 1] up to [Mode 3] on the RCU.
•Limitations of use
Each memory can store a different picture size and position, but there are limitations on the possible pictures
sizes and positions because of the projector being at a xed location. In order to calculate the best position of the
projector toward the screen, the installer has to make sure that among the different desired pictures, the smaller
one with the smaller zoom, is within the offset limits (horizontal and vertical shifts) of the projector. Once the
position of the projector is determined by the smallest possible picture, double check that the larger one does not
exceed the zoom capacity.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision Eos at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision Eos in the language / languages: English as an attachment in your email.

The manual is 13,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info