768191

DreamVision Eos Manual

9
Zoom out
Zoom in
Previous page
1/48
Next page
INSTALLATION GUIDELINES
R699900 - Eos Series User Manual 9
2.5  Installing the projection screen
Install the projection screen and this unit such that they are perpendicular to each other as showed in the picture
below.
Place this unit perpendicular to the screen.
Use the electronic shift and zoom to correct the picture size and position as needed. You can also use
the feet to adjust the projected picture level.
Screen material suitable for 4K/8K projection.
To optimize the sharpness and detailing of the picture, please choose a screen material optimized for ultra High
resolution (UHD 4K) or 8K if you are installing a Eos Signature. Avoid any material with uniform patterns as
checks that may cause interference artefacts to occur. If this is the case, you can try to slightly change the size
of the projected image to make the interference patterns less noticeable.
2.6  When to use the High Altitude mode
When using this unit at a location that is higher than 900 meters or 3000 feet above sea level and making the air
pressure low enough to decrease its efcacity cooling this unit, set the “High Altitude Mode” to “On”.
2.7  Ceiling Mounting the Unit
AA
A A
d=290 mm
D=337 mm
When mounting of this unit is required, make use of the 4 screw holes (M5x20 screws) at the bottom of this unit
indicated by the letter A. You can remove the feet to insert the ceiling mount screws. Allow sufcient space around
the air inlets to avoid blocking them.
Precautions for Ceiling-mount
• To ceiling-mount this unit, special expertise and techniques are necessary. Be sure to ask your dealer or
specialist to perform mounting.
• Do not mount at places that may be subjected to vibration and shock.
• Depth of the screw holes (A) is 23 mm. Use at least 13 mm long screws but not longer than 23 mm as you
may damage inside the projector.
• Install at a safe place in case this unit or a part of it may drop. If the light-source lamp is broken, small pieces
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision Eos at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision Eos in the language / languages: English as an attachment in your email.

The manual is 13,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info