768190
30
Zoom out
Zoom in
Previous page
1/44
Next page
7.0 MENU AND PICTURE SETTING
30 R699740 - DreamBee User Manual
Mask
The Mask function is used to hide the outer area of the picture. Adjust the Mask value between 0%, 2,5% and 5%.
MENU
Setup
Mask
Off, 2,5% or 5%
7.5 Custom Image Profile
You can adjust the projected image to a desired image quality and save the adjusted values into the Image profile
Menu. Besides the default “Cinema”, “Natural” and “Dynamic” settings, there are 3 more types of user-defined
settings for image profile.
Parameters stored into an Image Profile
An Image Profile defines a set of values that customize a picture setting. These values can be stored into memory
in User 1, User 2 and User 3 Image Profiles. The following parameters can be adjusted and memorized:
Contrast
•Brightness
Color
Sharpness
DNR
Color Temp.
Gamma
Offset
Setting a new Image Profile
Select a Preset Image Profile
MENU
Setup
Image Profile
Cinema
Go to Image Adjust Menu and modify the Contrast / Brightness / Color / Sharpness / DNR / Color Temp. /
Gamma and Offset values to your convenience.
MENU
Image
Image Adjust
Contrast
set a value between -30 and +30
MENU
Image
Image Adjust
Brightness
set a value between -30 and +30
MENU
Image
Image Adjust
Color
set a value between -30 and +30
MENU
Image
Image Adjust
Sharpness
set a value between -30 and +30
MENU
Image
Image Adjust
DNR
set a value between 0 and +30
MENU
Image
Color Temp.
set a value between -255 and 0 for each color
MENU
Image
Gamma
set to Normal / A / B or C
MENU
Image
Offset
set a value between -30 and +30 for each color
•Save these values into a User Profile, by example User 1:
MENU
Setup
Profile Memory
Save User 1
If you want to reset the Preset Image Profiles (Cinema, Natural and Dynamic), you can reset to default values
through the Profile Memory Menu.
MENU
Profile Memory
Reset Cinema
MENU
Profile Memory
Reset Natural
MENU
Profile Memory
Reset Dynamic
7.6 Video Menu
COMP
You can set up to 6 profiles: Cinema, Natural, Dynamic, User 1, User 2 and User 3. The Image Profile can
be directly accessed with the Remote Control Unit buttons.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision DreamBee at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision DreamBee in the language / languages: English as an attachment in your email.

The manual is 8,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info