768190
28
Zoom out
Zoom in
Previous page
1/44
Next page
7.0 MENU AND PICTURE SETTING
28 R699740 - DreamBee User Manual
7.3 Image Menu
Contrast
The contrast function is used to adjust the contrast between the light and dark areas of the displayed image. A
correct contrast setting is important for good image reproduction. Adjust the Contrast value between -30 and +30.
Brightness
The brightness function is used to adjust the overall light output. Adjust the Brightness value between -30 and +30.
MENU
Image
Image Adjust
Brightness
Color
The Color function (or Saturation) is used to adjust the color saturation levels. Adjust the Color value between -30
and +30. MENU
Image
Image Adjust
Color
Tint
The Tint function is used to adjust the color hue to obtain true color reproduction and is only active for NTSC
sources on Video and S-Video inputs. Adjust the Tint value between -30 (more red) and +30 (more green).
MENU
Image
Image Adjust
Tint
Sharpness
The Sharpness function is used to adjust the image sharpness of the picture. Adjust the Sharpness value between
-30 (soft) and +30 (sharp).
MENU
Image
Image Adjust
Sharpness
DNR
The DNR function (Digital Noise Reduction) is used to reduce digital noise on the picture. Adjust the DNR value
between 0 (low) and +30 (high).
MENU
Image
Image Adjust
DNR
Color Temp.
Color temperature can be set to Low, Middle, High, User 1 or User 2. (User 1 and 2 allows a fine adjustment of the
values for red, green, and blue channels).
Color temperature stands for the spectral properties of a light source. Low color temperature implies warmer (more
yellow/red) light while high color temperature implies a colder (more blue) light.
The User settings allow a manual configuration of each primary color Red, Green and Blue from -255 to 0.
*TEST PATTERN MENU
Press the [ENTER] button to switch to the test pattern image. Press the [ENTER] or [TEST] button to alter the test
pattern to be projected. Press the [EXIT] button to clear the menu screen.Press the [EXIT] button again to clear the
test pattern.
Accurate picture calibrations may require professional tools such as dedicated software and colormeter.
Enter Image Adjust Menu Select Contrast tab Set a Value between -30 and +30
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DreamVision DreamBee at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DreamVision DreamBee in the language / languages: English as an attachment in your email.

The manual is 8,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info