680239

Draytek VigorSwitch G1240 Manual

64
Zoom out
Zoom in
Previous page
1/83
Next page
VigorSwitch G1240 User’s Guide
58
Function name:
SNMP Configuration
Function description:
This function is used to configure SNMP settings, community name, trap host and public
traps as well as the throttle of SNMP. A SNMP manager must pass the authentication by
identifying both community names, then it can access the MIB information of the target
device. So, both parties must have the same community name. Once completing the setting,
click <Apply> button, the setting takes effect.
Parameter description:
SNMP enabled The term SNMP enable here is used for the activation or
de-activation of SNMP. Default is Disable.
Default SNMP function: Disable
SNMP Trap destination Set the IP address for the SNMP Trap Host.
SNMP Get Community
SNMP Set Community
SNMP Trap Community
Community name is used as password for authenticating
if the requesting network management unit belongs to the
same community group. If they both don’t have the same
community name, they don’t belong to the same group.
Hence, the requesting network management unit can not
access the device with different community name via
SNMP protocol; If they both have the same community
name, they can talk each other.
Community name is user-definable with a maximum
length of 15 characters and is case sensitive. There is not
allowed to put any blank in the community name string.
Any printable character is allowable.
The community name for each function works
independently. Each function has its own community
name. Say, the community name for Read only works for
Read function and can’t be applied to other function such
as Write and Trap.
Default community name for Get: public
Default community name for Set: private
Default community name for Trap: public
… 64 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek VigorSwitch G1240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek VigorSwitch G1240 in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info