680239

Draytek VigorSwitch G1240 Manual

50
Zoom out
Zoom in
Previous page
1/83
Next page
VigorSwitch G1240 User’s Guide
44
Parameter description:
Maximum Frame support
up to 9600 bytes
This function supports jumbo frames of up to 9600 bytes.
Check the check box to enable it.
In general, 1500 bytes frame sizes are supported by
Ethernet. With this feature checked, the frame size can be
extended up to 9600 bytes. In comparison with small
frame, the CPU load can be reduced and the throughput
can be increased.
Drop frames after excessive
collisions
Drop frames after excessive collisions.
After an excessive collision, the MAC drop frames might
occur. If yes, a frame is dropped after excessive collision.
This is IEEE Standard 802.3 half-duplex flow control
operation.
Enable Power Saving Check this box to enable the power saving mode for the
switch.
Link Show link status of this port.
Mode Set the speed and duplex of the port. If the media is
1Gbps fiber, there are several modes to choose: Auto, 1
Gbps FDX and Disabled. If the media is TP, the speed is
Auto, 1Gbps FDX/10 Mbps FDX /100Mbps FDX /10
Mbps HDX/100 Mbps HDX and Disabled.
In Auto mode, no default value.
Flow Control You can Just tick the check box () to enable flow
control. If flow control is set Enable, both parties can
send PAUSE frame to the transmitting device(s) if the
receiving port is too busy to handle. When it is set
Disable, there will be no flow control in the port. It drops
the packet if too much to handle.
Default: Disable
Flow Control Status Display if flow control is enabled or disabled. In default,
it is disabled.
Port Description Description of device ports can not include “ # % & ‘ + \.
3
3
.
.
3
3
.
.
2
2
D
D
e
e
t
t
a
a
i
i
l
l
e
e
d
d
P
P
o
o
r
r
t
t
S
S
t
t
a
a
t
t
i
i
s
s
t
t
i
i
c
c
s
s
The function of Detailed Port Statistics collects any information and provides the counting
about the traffic of the port, no matter the packet is good or bad.
In the following figure, the window can show only one port counter information at the
same time. To see another port’s counter, you have to pull down the list of Select, then you
will see the figures displayed about the port you had chosen.
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek VigorSwitch G1240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek VigorSwitch G1240 in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info