680239

Draytek VigorSwitch G1240 Manual

48
Zoom out
Zoom in
Previous page
1/83
Next page
VigorSwitch G1240 User’s Guide
42
Location Set the location of the switch where it was located.
Contact For easily managing and maintaining device, you may
write down the contact person and phone here for getting
help soon. You can configure this parameter through the
device’s user interface or SNMP.
Device name The name of the switch, User-defined. Default is
VigorSwitch G1240.
Firmware version The firmware version in this switch.
Hardware Version
The hardware version of this switch.
Serial number The serial number is assigned by the manufacturer.
Host IP address The IP address of the switch.
Host MAC address It is the Ethernet MAC address of the management agent
in this switch.
Active Subnet Mask Show the active subnet mask of this switch.
Active Gateway Show the active gateway of this switch.
DHCP Server Show the IP address of the DHCP server.
Default: 0.0.0.0
DHCP Settings It is enabled in default.
IP Address Users can configure the IP settings and fill in new values.
Then, click Apply to update.
Subnet Mask Subnet mask is made for the purpose to get more network
address because any IP device in a network must own its
IP address, composed of Network address and Host
address, otherwise can’t communicate with other devices
each other. But unfortunately, the network classes A, B,
and C are all too large to fit for almost all networks,
hence, subnet mask is introduced to solve this problem.
Subnet mask uses some bits from host address and makes
an IP address looked Network address, Subnet mask
number and host address. It is shown in the following
figure. This reduces the total IP number of a network able
to support, by the amount of 2 power of the bit number of
subnet number (2^(bit number of subnet number))
Subnet mask is used to set the subnet mask value, which
should be the same value as that of the other devices
resided in the same network it attaches.
For more information, please also see the Section 2-1-4
“IP Address Assignment” in this manual.
Default: 255.255.255.0
Default Gateway Set an IP address for a gateway to handle those packets
that do not meet the routing rules predefined in the
device. If a packet does not meet the criteria for other
pre-defined path, it must be forwarded to a default router
on a default path. This means any packet with undefined
IP address in the routing table will be sent to this device
unconditionally.
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek VigorSwitch G1240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek VigorSwitch G1240 in the language / languages: English as an attachment in your email.

The manual is 1,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info