680232
89
Zoom out
Zoom in
Previous page
1/153
Next page
83
Item Description
LAN-A IP Network
Configuration
Enable DHCP Client – When it is enabled, VigorAP 903 will be treated as
a client and can be managed / controlled by AP Management server
offered by Vigor router (e.g., Vigor2860).
IP Address – Type in private IP address for connecting to a local private
network (Default: 192.168.1.2).
Subnet Mask – Type in an address code that determines the size of the
network. (Default: 255.255.255.0/ 24)
Default Gateway – In general, it is not really necessary to specify a
gateway for VigorAP 903. However, if it is required, simply type an IP
address as the gateway for VigorAP 903. It will be convenient for the
access point to acquire more service (e.g., accessing NTP server) from
Vigor router.
Enable Management VLAN – VigorAP 903 supports tag-based VLAN for
wireless clients accessing Vigor device. Only the clients with the specified
VLAN ID can access into VigorAP 903.
VLAN ID – Type the number as VLAN ID tagged on the transmitted
packet. “0” means no VALN tag.
LAN-B IP Network
Configuration
IP Address – Type in private IP address for connecting to a local private
network (Default: 192.168.2.2).
Subnet Mask – Type in an address code that determines the size of the
network. (Default: 255.255.255.0/ 24)
Enable Management VLAN – VigorAP 903 supports tag-based VLAN for
wireless clients accessing Vigor device. Only the clients with the specified
VLAN ID can access into VigorAP 903.
VLAN ID – Type the number as VLAN ID tagged on the transmitted
packet. “0” means no VALN tag.
DHCP Server
Configuration
DHCP stands for Dynamic Host Configuration Protocol. DHCP server can
automatically dispatch related IP settings to any local user configured as a
DHCP client.
Enable Server - Enable Server lets the modem assign IP address to every
host in the LAN.
Start IP Address - Enter a value of the IP address pool for the DHCP
server to start with when issuing IP addresses. If the 1st IP address of
your modem is 192.168.1.2, the starting IP address must be
192.168.1.3 or greater, but smaller than 192.168.1.254.
End IP Address - Enter a value of the IP address pool for the DHCP
server to end with when issuing IP addresses.
Subnet Mask - Type in an address code that determines the size of
the network. (Default: 255.255.255.0/ 24)
Default Gateway - Enter a value of the gateway IP address for the
DHCP server.
Lease Time - It allows you to set the leased time for the specified PC.
Primary DNS Server - You must specify a DNS server IP address
here because your ISP should provide you with usually more than one
DNS Server. If your ISP does not provide it, the modem will
automatically apply default DNS Server IP address: 194.109.6.66 to
this field.
Secondary DNS Server - You can specify secondary DNS server IP
address here because your ISP often provides you more than one DNS
Server. If your ISP does not provide it, the modem will automatically
apply default secondary DNS Server IP address: 194.98.0.1 to this
field.
Relay Agent - Specify which subnet that DHCP server is located the relay
89


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek Vigor AP 903 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek Vigor AP 903 in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info