680232
87
Zoom out
Zoom in
Previous page
1/153
Next page
81
Encryption Type for
Open/Shared
This option is available when Open/Shared is selected as Security Mode.
Choose None to disable the WEP Encryption. Data sent to the AP will not
be encrypted. To enable WEP encryption for data transmission, please
choose WEP.
WEP Keys - Four keys can be entered here, but only one key can be
selected at a time. The format of WEP Key is restricted to 5 ASCII
characters or 10 hexadecimal values in 64-bit encryption level, or restricted
to 13 ASCII characters or 26 hexadecimal values in 128-bit encryption
level. The allowed content is the ASCII characters from 33(!) to 126(~)
except '#' and ','.
Encryption Type for
WPA/PSK and
WPA2/PSK
This option is available when WPA/PSK or WPA2/PSK is selected as
Security Mode.
Select TKIP or AES as the algorithm for WPA.
Pass Phrase Type 8~63 ASCII characters, such as 012345678 (or 64 Hexadecimal
digits leading by 0x, such as "0x321253abcde...").
Connection Type Choose DHCP or Static IP as the connection mode.
DHCP – The wireless station will be assigned with an IP from VigorAP.
Static IP – The wireless station shall specify a static IP for connecting to
Internet via VigorAP.
Device Name This setting is available when DHCP is selected as Connection Type.
Type a name for the VigorAP as identification. Simply use the default
name.
IP Address This setting is available when Static IP is selected as Connection Type.
Type an IP address with the same network segment of the LAN IP setting
of VigorAP. Such IP shall be different with any IP address in LAN.
Subnet Mask This setting is available when Static IP is selected as Connection Type.
Type the subnet mask setting which shall be the same as the one
configured in LAN for VigorAP.
Default Gateway This setting is available when Static IP is selected as Connection Type.
Type the gateway setting which shall be the same as the default gateway
configured in LAN for VigorAP.
After finishing this web page configuration, please click OK to save the settings.
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek Vigor AP 903 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek Vigor AP 903 in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info