680219

Draytek Vigor 2832 Series Manual

699
Zoom out
Zoom in
Previous page
1/726
Next page
Vigor2832 Series User’s Guide
68
7
Frag – “ON” means to bind the fragmented packet; “OFF” means
not to care. It is the default setting.
bind insert
<After_BindIndex> <ACT>
<TrunkName> <Member>
<SrcIp:A~B> <DstIp:A~B>
<DstPort:A~B> <Proto>
<Frag>
It is used to insert additional load balance policy into an existing
policy.
After_BindIndex – Specify an index number that new additional
policy should be inserted before. See the following example:
vpn trunk bind insert 1 y vpnlb 2
192.168.10.3~192.168.10.200
192.168.99.200~192.168.99.200 80~80 TCP OFF
ACT – Specify the action. “y” means active; “n” means inactive or
delete.
TrunkName - Specify the name of the VPN trunk.
Member – Specify the index number of the LAN to LAN (dial-out)
profile to be bound.
SrcIp:A~B – Specify the source IP range (e.g.,
192.168.10.0~192.168.10.255.
DstI p:A~B - Specify the destination IP range (e.g.,
192.168.1.0~192.168.1.255.
DstPort:A~B – Specify the destination port range (1~65535).
Proto – Specify the protocol.
0 – any
1 – ICMP
2 – IGMP
6 – TCP
17 – UDP
255 – TCP/UDP
Frag – “ON” means to bind the fragmented packet; “OFF” means
not to care. It is the default setting.
SetGre show
<Dialout_Index>
Display the GRE over IPSec settings in specified LAN to LAN profile.
Dialout_Index – Index number of the LAN to LAN (dial-out) profile.
SetGre
<Active/In-active><Dialout_I
ndex><GRE_MyIP><GRE_Pee
rIP><Logical_Traffic>
Active/In-active - Specify the action. “y” means active; “n” means
inactive.
Dialout_Index – Index number of the LAN to LAN (dial-out) profile.
GRE_MyIP –Type the virtual IP for router itself for verified by peer.
GRE_PeerIP –Type the virtual IP of peer host for verified by router.
Logical_Traffic - Specify the action for RFC2890. “y” means active;
“n” means inactive.
An_Gre GreIPsecAnalyze
<ON/OFF>
These commands are used for RD debug.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
> vpn setup 1 name1 pptp_out 1.2.3.4 vigor 1234 192.168.1.0 255.255.255.0
% Profile Change Log ...
% Profile Index : 1
% Profile Name : name1j
% Username : vigor
% Password : 1234
% Call Direction : Dial-Out
% Type of Server : PPTP
% Dial to : 1.2.3.4
% Remote NEtwork IP : 192.168.1.0
% Remote NEtwork Mask : 255.255.255.0
> vpn setup 2 market pptp_out 5.6.7.8 vigor 5678 192.168.1.31 255.255.255.0
% Profile Change Log ...
% Profile Index : 2
% Profile Name : market
… 699 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek Vigor 2832 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek Vigor 2832 Series in the language / languages: English as an attachment in your email.

The manual is 9,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info