680219

Draytek Vigor 2832 Series Manual

698
Zoom out
Zoom in
Previous page
1/726
Next page
Vigor2832 Series User’s Guide
686
designated time.
lb <add/del> <name>
<Member#1> <Member#2>
It means to create VPN trunk with load balance.
add/del - Add or delete a profile for used in VPN Trunk.
name – Specify the name of the VPN trunk.
Member#1 – Indicate the first LAN to LAN profile.
Member#2 – Indicate the second LAN to LAN profile.
lb algorithm <name>
<RR/W-RR/Fastest>
Set multiple VPN tunnels for using as traffic load balance tunnel.
Such command is to configure the algorithm (with round robin
mode) of Load Balance.
name – Specify the name of the VPN trunk.
RR – It means round robin mode. All of the dial-out profiles will be
taken turns equally.
lb algorithm
<name><W-RR><Auto>
<AccordingRatio>
<Member1:Member2>
Such command is to configure the algorithm (with round robin
mode) of Load Balance.
name – Specify the name of the VPN trunk.
W-RR – It means weighted round robin mod based on speed ratio.
Auto - the speed must be based on Lay2.
AccordingRatio – the speed must be based on given ratio.
Member#1 – Inidcate the first LAN to LAN profile.
Member#2 – Indicate the second LAN to LAN proifle.
lb algorithm
<name><Fastest>
Such command is to configure the algorithm (with fastest mode) of
Load Balance. Most of traffics will be led to the channel with the
fastest connection.
name – Specify the name of the VPN trunk.
bind usage <BindIndex> Display detailed information for VPN Load Balance Tunnel Bind.
BindIndex – Indicate the index number of the tunnle bind.
bind show
<LoadBalanceName>
Display the bind information for VPN Load Balance profile.
LoadBalanceName – type the name of VPN Load Balance profile
bind reset_default Reset the bind tunnel for VPN load balance to factory reset settings.
bind set <BindIndex> <ACT>
<TrunkName> <Member>
<SrcIp:A~B> <DstI p:A~B>
<DstPort:A~B> <Proto>
<Frag>
Set the binding tunnel policy.
BindIndex – Indicate the index number (1 ~ 64) for the tunnel to be
bound.
vpn trunk bind set 1 y vpnlb 1
192.168.10.1~192.168.10.2
192.168.99.1~192.168.99.254 1~65535 0 OFF
ACT – Specify the action. “y” means active; “n” means inactive or
delete.
TrunkName - TrunkName - Specify the name of the VPN trunk
created by using “vpn trunk lb” command.
Member – Specify the index number of the LAN to LAN (dial-out)
profile to be bound.
SrcIp:A~B – Specify the source IP range (e.g.,
192.168.10.0~192.168.10.255.
DstI p:A~B - Specify the destination IP range (e.g.,
192.168.1.0~192.168.1.255.
DstPort:A~B – Specify the destination port range (1~65535).
Proto – Specify the protocol.
0 – any
1 – ICMP
2 – IGMP
6 – TCP
17 – UDP
255 – TCP/UDP
… 698 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek Vigor 2832 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek Vigor 2832 Series in the language / languages: English as an attachment in your email.

The manual is 9,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info