499408
5
Zoom out
Zoom in
Previous page
1/13
Next page
5
System assembly is described step by step in the following
sections. Please ensure that electrical wiring and
connection is performed by a certified electrician in
keeping with VDU and local EVU regulations.
ÀBaseplate
Begin the assembly by removing the baseplate (D)
from package 4, and placing it at the intended location
of the system.
Note:
The baseplate must be placed flat and level! For
orientation purposes, the rear positioning tongue is
provided with an adhesive label.
E
A
B
C
Fig. 1
D
Fig. 2
ÁRight tanning element
Remove the right element (A) from package 1. You must
now carry out the initial assembly of the two stand
feet.
Stand foot, facing side lower right:
From the accessory pack, take the stand foot (4), two
M10 nuts (5) and washers (6), and assemble the foot
as shown in Fig. 3.
Fig. 3
4
5/6
Stand foot, facing side lower left:
From the accessory pack, take the stand foot (7), two
M10 nuts (5) and washers (6), and assemble the foot
as shown in Fig. 4
Fig. 4
7
6
5
Ensure that the installation plate of the stand foot is
correctly positioned for connection to the next element
(Fig. 4).
ÂLeft tanning element
Remove the left element (B) from package 2, and
assemble the stand foot (8) as follows:
From accessory pack 2, take 2 distance collars (9), two
M10 nuts (10) and 2 lock-washers (11), and assemble
as shown in Fig. 5.
Note: The bearing (12) for the door element is already
fitted in stand foot (8).
9
12
10/11
8
Fig. 5
1
14
13
System Installation
The system is delivered in several separately packed
sections for transport to its final installation point. The
complete package contains the following individual
elements:
A right tanning element (package 3)
B.left tanning element (package 2)
C.door tanning element (package 1)
D.base
E.exhaust unit
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dr. Kern Tancan 8000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dr. Kern Tancan 8000 in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info