499408
11
Zoom out
Zoom in
Previous page
1/13
Next page
11
Fig. 27
Fig. 28
Modification to coin box operation
For this procedure 2 persons are needed.
lIf the coinbox is not connected yet, separate the
appliance completely from power supply.
lDuring one person keeps pushing simultaneously the
up and down button at the timer, the other person is
connecting the appliance to power supply again.
lIf the coinbox is already connected, the appliance
must not be separated from the power supply.
In this case follow the instructions below:
- one person keeps pushing simultaneously the up
and down button at the timer.
- the other person starts running the coin box by
throwing in a coin
lKeep pushing the up and down button as long as 0
appears on the timer display (fig. 27).
The appliance is now coin box operated.
After release by the coin box the timer is going from 0
minutes upwards.
The appliance can be started and stopped.
The up and down buttons are locked. The other buttons
keep their function.
Resetting to timer operation
The resetting is only possible, if the coinbox is separated
and the wire jumper L1-Time is mounted (see
connection diagram on fig. 26).
For this procedure 2 persons are needed.
lSeparate the appliance completely from power supply.
lDuring one person keeps pushing simultaneously the
face tanner and body fan button at the timer, the other
person is connecting the appliance to power supply
again.
lKeep pushing the face tanner and body fan button
as long as 88 appears on the timer display (fig. 28).
lAfterwards the display expires.
The appliance is now timer operated.
When the time is over, the appliance is completely
switched off and the timer display expires.
Attention: The fan delay has to be executed by the coin
box!
Fig. 29
Freeze the appointed time
lTune the favoured tanning time at the timer.
lPush the button "fan" and " upward" at the same time
(fig. 29).
Now the sunbed is working as long as the appointed
time is expired.
In between it is not possible to shift the time, the bottons
are blocked. But the sunbed can be switched off an on.
By switching on again the balance time elapses. After
run of time the sunbed cuts off and a new time can be set.
Timer adjustment
jumper 2
jumper 1
jumper 1 (time period):
opened = maximum period 30 min
closed = maximum period 60 min
jumper 2 (fan delay)
opened = without fan delay
closed = with fan delay
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dr. Kern Tancan 8000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dr. Kern Tancan 8000 in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info