499401

Dr. Kern excellent 32 3 Manual

22
Zoom out
Zoom in
Previous page
1/28
Next page
22
english
For tanning units with body cooler you can switch it
on / off with the key  at the digital timer (Fig30).
Fig. 30
ON/OFF
8.8.
ÀÁ ÄÃÂ
Replacing the Lamps and Starters
USE ONLY THOSE LAMPS WHICH ARE DESIGNATED
ON THE SPECIAL LAMP LABEL LOCATED AT THE REAR
OF THE CANOPY.
The UV life of the lamps vary from manufacturer to
maufacturer, but is usually between 500 and 700
hours of use.
Only authorised, original parts and factory
components can be used in this machine; please
make sure to have your model type and serial
number available when ordering these from your
DR. KERN distributor.
As in all other service operations, the tanning unit
must be disconnected from its power source. In
order to replace lamps and starters, the acrylic
panes must first be removed from the top and the
recliner segment. The pane in the recliner is held in
place in a groove running along the front and in a
mounting profile along the rear longitudinal side.
The mounting profile is clipped together with the
pane into the rear longitudinal side. To remove the
pane, the profile must be pressed slightly downward
and pulled forward with uniform pressure. The
acrylic pane is then released along the rear side
and can be removed from the recliner.
Please note:
The acrylic pane expands under the influende of heat,
i.e. it becomes longer and wider, which means that it
should only be removed when cold.
Fig. 24
Fig. 23
To replace the pane, inserted it into the groove along the
front side and set it down on the supports in the recliner.
Fig. 24.
Acrylic pane
Longitudinal stringer
mounting profile
Groove
Acrylic pane
Bedienung
The tanning unit will be switched on by using the On/Off-
switch À (Fig.30) at the digital-timer.
With the keys à and Ä (Fig30.) you can select your
tanning time (max. 30 minutes).
Ä=up, Ã=down
After lopse of time the digital timer of the tanning unit switches
off automatically. For cooling the tanning unit the integrated
fans are working for further 3 minutes.
For tanning units with facial lamps the digital timer (Fig.30)
has to be switched on with key Á .
SThe facial tanner achieves his full tanning capacity after an
exposure time of 3 minutes.
After switching off and immediate resetting the tubes ignite
after 3 minutes again.
Timer adjustment
jumper 1 (time period):
opened = maximum period 30 min
closed = maximum period 60 min
jumper 2 (fan delay)
opened = without fan delay
closed = with fan delay
jumper 2
jumper 1
Fig. 30
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dr. Kern excellent 32 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dr. Kern excellent 32 3 in the language / languages: English, German as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info