Manual Dovre Sense 203GA (page 53 of 204) (English, German, Dutch, French, Spanish)

745853

Zoom out

Zoom in

1/204

Subject to change because of technical improvements

7. Finish the seam between the pipe and the cone of

the roof sheet or lead slab watertight with silicon

sealant and if necessary a storm collar (5).

8. Install the roof sleeve (6) and secure it with the

clamping strap included in the delivery.

Establishing a gas connection

The connection to the gas pipe is on the back of the

gas regulator block, which is at the bottom right of the

stove.

The connection must meet the following conditions :

A coloured gas valve must be inserted in the gas

supply pipe, as close to the stove as possible and

always accessible.

The connection must be voltage-free.

Have a certified installer make the connection.

Follow the instructions below:

1. Check whether the type of gas and gas pressure

on site correspond with those marked on the type

plate.

The type plate is located on the appliance.

2. Assemble the gas supply pipe. 3/8” G pipe or cop-

per pipe with diameter 10/12 mm suffices for pipes

up to +/- 10 m. 1/2” G pipe or copper pipe with dia-

meter 13/15 mm is used for lengths exceeding 10

3. Install the gas valve.

4. Connect the stove to the gas supply pipe. The gas

connection can be made using the opening on the

back. Use a 3/8” coupling to do this.

5. Check if the supply pipe is gastight (using soapy

water, for example).

Installing the remote control

set

The Mertik Maxitrol GV60 remote control set consists

of a handset (transmitter) and a receiver. The system

works on batteries; connecting an AC adaptor is

optional.

The batteries (2 x 1.5 Volt AAA for the handset

(transmitter), 4 x 1.5 Volt AA for the receiver)

are included.

Use only the Mertik Maxitrol AC adaptor or an

adaptor preapproved by Mertik Maxitrol. Other

adapters probably do not suit your system

and/or can damage it.

Batteries – handset (transmitter)

▪ 2x 1.5 Volt AAA (LR 03) (recommended quality:

alkaline).

▪ Handsets with display: Battery indicator on the dis-

play.

▪ We recommend that you replace the battery after 2

years.

Batteries – receiver

▪ 4x1.5 V AA (recommended quality: alkaline)

▪ indicator light Battery nearly empty: beeps regularly

for 3 seconds if the motor is running.

▪ An AC adaptor may have to be used instead of bat-

teries.

Insert the batteries in the transmitter (handset) and

in the receiver (black box, lid can be opened eas-

ily).

The receiver is located on the left in the base of the

appliance, behind the hatch in the base; see the fol-

lowing figure.

09-20021-414

Programming the electronics code

Codes selected from approximately 65,000 randomly

available codes are automatically assigned to all Mer-

tik Maxitrol electronics. This code is assigned to the

handset for the remote control set. The receiver must

read this code from the handset.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre Sense 203GA in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 5,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre Sense 203GA Manual

Product: