571279
24
Zoom out
Zoom in
Previous page
1/38
Next page
wijzigingen op grond van technische verbeteringen voorbehouden
24
1.5. Access to the burner unit (for maintenance or repairs)
Proceed as follows:
Open the front door and remove the ceramic blocks. You can now unscrew the (M6)
screws from the burner box.
Remove the rear heat shield. The mounting plate of the control block can now be
unscrewed.
Remove the thermal switch holder (TTB) by unscrewing the two self-tapping screws on
the back plate. Do not forget to remove the thermostat sensor from its holders.
You can now pull the complete burner unit (control block and burner) out of the back of
the appliance.
To ret the burner unit reverse the order of the steps above.
2 Instructions for use
Warning: After installation we recommend running the appliance for several hours at
the highest setting with good ventilation, to give the paint a chance of hardening. White
deposits on the glass and the interior may occur during this initial period.
This deposit can be wiped off with a dry cloth once the
appliance has cooled down.
The appliance has two burners. The rear burner is controlled by the thermostat knob. You
select the position you want and the controlling thermostat sets the correct temperature.
The front burner is controlled by the hand tap. You choose the position you want and the
burner stays in that position until you change it.
The following parts of the appliance are considered "operating surfaces" and can
therefore reach high temperatures:
all cast iron components
the heat exchanger
the glass surface.
We recommend placing an additional screen around the appliance if children or older
people are present.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dovre 725GAP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dovre 725GAP in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dovre 725GAP

Dovre 725GAP Additional guide - English, German, Dutch - 1 pages

Dovre 725GAP User Manual - Dutch - 24 pages

Dovre 725GAP Additional guide - French - 1 pages

Dovre 725GAP User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info