Manual Dovre 2400BSA (page 34 of 56) (English, German, Dutch, French)

571311

Zoom out

Zoom in

1/56

2300 - 2400 34 03.27865.100

3.3. Installation of the fireplace

3.3.1. Positioning and connection

Put the fireplace at proper

height. Make sure that it is

stable and level and that the

side panels are perpendicular

to the bottom plate. Put the

fireplace far enough from the

walls, so that minimum 10

cm of free air passage re-

mains between the back of

the fireplace and the wall

after adding the necessary

insulation.

Make an airtight connection between fireplace and chimney, according to good prac-

tice.

Before further installation of the fireplace, check for sufficient draft in the chimney

and for proper connection between the smoke duct and the appliance.

For that purpose, you can light a small intense fire with paper and small dry kindle.

In case of a brick smoke duct, wait until the duct is dry enough.

3.3.2. Mounting

Start with the masonry round the base of the fireplace. In that masonry, the air sup-

ply grids (optional) will be installed. Minimum air supply opening is 250 cm². The

grids may be installed on all sides.

It is important that air flows freely into the convection chamber. If you use an air

vent (to convey outside air into the convection chamber), remember to build in the

adjustment knob.

It is recommended to cover the inner side of the convection chamber with extra re-

flecting insulation material. That prevents loss of heat radiation

to outside walls or adjacent rooms, as well as deterioration of

any inside wall insulation.

Make sure that the doors of the hearth move freely over the

plate in front of the fireplace.

Continue building the chimney up to the smoke dome. Assure a

gap of at least 2 mm between the fireplace and the masonry to

allow for dilatation of the fireplace. If necessary, use heat-

resistant strips.

Upper structure support

The masonry over the fireplace must not rest on the fireplace. That is why a support

is used. Between the steel support and the smoke dome, you must leave a free

space of at least 3 mm. That will prevent tensions in the material that might tear the

upper structure. The steel support may rest on the side structure or be attached to

the wall by means of threaded rods.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre 2400BSA in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre 2400BSA Manual

Product: