Manual Dovre 2175CBS3 (page 35 of 164) (English, German, Dutch, French, Italian, Spanish)

571220

Zoom out

Zoom in

1/164

Placing and connecting the stove

1. Put the appliance at the right height and level it.

2. Check that there is a clearance of 100 mm

between the existing walls, which must have the

necessary insulation (see chapter "Installation

Conditions"), and the back of the appliance; see

the next two figures.

3. Connect the appliance airtight to the flue

(chimney).

4. Check the draught in the flue and the seal of the

connection on the flue gas duct by making a small,

intense trial fire with newspaper and dry, small

kindling.

In the case of new masonry, wait until the

masonry has dried sufficiently.

5. On the outside air connection: connect the outside

air intake to the connection kit you have fitted to

the appliance.

Building the fireplace

Inside the fireplace you provide space for convection.

In this space the air must be able to move freely. It

must be possible for air to be sucked in for

combustion, and the air heated by the stove (the

convection air) must be able to flow freely into the

space to be heated; see next figure.

A Convection air current

B Radiated heat

C Air supply from the room to be heated

D Outside air supply through the wall

E Outside air supply through the floor

When building the fireplace, follow these

instructions for the convection space:

Subject to change because of technicalimprovements

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre 2175CBS3 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 28,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre 2175CBS3 Manual

Product: