571220
33
Zoom out
Zoom in
Previous page
1/164
Next page
Installation
Preparation
Please check the appliance for damage caused
during transport or any damage or defects
immediately after delivery.
If you detect damage caused during transport
or any other damage or defects, do not use the
appliance and notify the supplier.
Remove the removable parts (fire-resistant inner
plates, fire compartment, fire basket, ash removal
port and ash pan) from the appliance before you
start installing the appliance.
By removing removable parts, it is easier to
move the appliance and to avoid damage.
Note the location of those removable parts, so
that you have no difficulties in installing the
parts in the right place later on.
Removing the fireproof inner plates
Remove the fireproof inner plates in the correct order
according to the instructions below.
1. Open the door by turning the latch outward and
unlocking the door; see next figure.
2. First take out the inner plates on both sides of the
appliance. In models 2175CBS3 and 2575CBS3
with the side glass, there are no inner plates.
3. Remove the left and right inner plates at the back
from the appliance.
4. Remove the inner plate in the middle at the back
from the appliance.
Cast iron inner plates protect the combustion
chamber and dissipate heat to the
environment.
Changing the direction of the
connection collar
If you want to use a 45° connection instead of a
vertical connection, for example because it simplifies
connection to an existing flue gas duct, you have to
rotate the connection collar 180°; see the next two
figures.
1. Loosen the connection between the connection
collar and the smoke dome by unscrewing the two
M8 nuts.
2. Lift the connection collar from the two bolts.
3. Rotate the connection collar 180° and put the
collar back onto the smoke dome.
4. Connect the connection collar to the smoke dome
by tightening the two M8 nuts.
5. Use stove sealant as a seal between the
connection collar and the smoke dome.
The stove sealant is not supplied with the
appliance.
Subject to change because of technicalimprovements
7
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dovre 2175CBS3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dovre 2175CBS3 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 28,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info