762071
6
Zoom out
Zoom in
Previous page
1/32
Next page
English
EN 3
Operation
The display
In standby mode (handset down, no dial tone) the display will show the date and
time, number of new and total number of calls stored in the Caller ID memory.
Immediately following the connection of a call, a call timer will be shown on the
display. The timer is a simple way to help you keep track of how long the call lasts.
Handsfree function
1. Press s. The handsfree function (speaker) will be activated and the LED
indicator next to the button will illuminate.
2. Dial the telephone number. To adjust the speaker volume, use the volume
control on the side.
3. Speak towards the microphone located on the front edge of the telephone.
4. Press s to terminate the call.
If you wish, you can switch between handset mode and handsfree mode during
the call.
Please note!
Please remember that in handsfree mode it is only possible for one person at a time to talk. The
switch-over between speaker and microphone is automatic and dependent on the sound level of the
incoming call and the microphone respectively. It is therefore essential that there are no loud noises,
e.g. music, in the immediate vicinity of the telephone, as this will disrupt the handsfree function.
Message Waiting indicator
Some PBX systems use a function called Message Waiting. The telephone can be
made to indicate this by having the Indicator ash in standby mode.
There is a switch located underneath the telephone for this (MW).
This function operates differently depending on the PBX in question. Please
contact the system controller for more information. The following four
alternatives are available: LED+, LED-, ringer indicator ( ) and high DC
voltage (HV).
When the telephone is used in systems without telephone exchanges, the ringer
indicator ( ) should be selected.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Doro 515C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Doro 515C in the language / languages: English as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info