762071
4
Zoom out
Zoom in
Previous page
1/32
Next page
English
EN 1
Installation
Important!
The earpiece of the handset may attract small ferromagnetic objects such as staples and pins, care should
be taken when placing the handset near these items.
Connection/Basic setting
1. Connect the curly cord to the handset and to the socket marked q on the telephone.
2. Replace the handset.
3. If supplied, connect the mains adapter to the DC 9V socket on the telephone and
to the mains power wall socket. If a power adapter is not used then batteries must
be tted! See “Batteries” section.
4. The display ashes the alarm setting. If not, hold v pressed down for around 4 seconds.
5. Press 0.
6. Scroll to the desired language using v/V. Press 0
7. Scroll to the desired contrast setting (2=normal) using v/V. Press 0
8. Scroll to the desired hour (00-23) using v/V. Press 0
9. Scroll to the desired minute using v/V. Press 0
10. Scroll to the desired day using v/V. Press 0
11. Scroll to the desired month using v/V. Press 0
12. Scroll to the desired pause setting (2 seconds=normal) using v/V. Press 0.
13.
Ensure the correct dialling method is displayed (ie: TONE). Press 0.
14.
Ensure the correct Recall time is displayed (ie: 100 (AU/UK/EU)/270 (FR)
/600 (NZ)). Press 0.
15. Connect the telephone cord to the network wall socket and to the socket marked
T on the telephone.
16. Lift the handset and listen for the dial tone.
Changing the clock, alarm settings, language or contrast
If you want to alter the clock, alarm, language or contrast at a later point, press and
hold v for around 4 seconds and repeat steps 4. - 14. above.
Batteries
For caller identication, memory and other functions to function in the event of a loss
of power, the telephone requires 3 type AAA 1.5V batteries. When the batteries are
running low, the symbol will illuminate. Use high quality batteries only.
1. Unplug the telephone cable and remove the cover.
2. Insert the batteries according to the markings for plus and minus terminals.
3. Replace the battery cover.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Doro 515C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Doro 515C in the language / languages: English as an attachment in your email.

The manual is 2,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info