554450
42
Zoom out
Zoom in
Previous page
1/58
Next page
42
ERECTING YOUR AWNING
Model with zip fitting
In case the annex is fitted to the awning by using zips, in most cases it
is possible to fit the annex on the left-hand as well as the right-hand
side of the awning. Before you start to erect the annex, the side panel
should be zipped out of the awning first, otherwise it will be impossible
to erect the annex. For further instructions of the use of the zips we
would like to direct you to page 49 where detailed instructions of the
zips are described.
1) Assemble the clamps onto the frame and slide the telescopic parts
into one another as far as possible, as per the enclosed frame
diagram.
2) Zip the annex onto the side wall of the awning.
3) The frame can now be placed underneath the canvas of the annex,
making sure that the corner sections are placed underneath the
annex first. After this you attach the corner sections together with
the concerning frame parts onto the roof rafter of the awning. Finally
the centre roof rafter should be placed underneath the annex.
4) Now tension the frame of the annex starting with the roof section.
Please take care that the uprights are placed exactly in the corner
seams of the annex. Now tension the uprights to get the correct
height making sure that all pegging points are at the same height
from the ground.
5) After you have fitted the ladder straps onto the anchor fittings, you
can start to peg out. Start pegging out at the corners right next to
the awning, after this with the two remaining corners. Please make
sure all is pegged out in a nice straight line.
6) You can now fit the optional annex inner tent inside the annex and
your annex is now ready for use.
On some models the annex is fitted with a double zip. In that case it
is possible to replace the side panel of the awning in order to create a
dividing wall. In this situation it is not possible to use an annex inner tent.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dorema Voortent-Luifel at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dorema Voortent-Luifel in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info