784482
13
Zoom out
Zoom in
Previous page
1/68
Next page
ENGLISH
13
ASSEMBLE THE DEVICE TO THE
MOUNTING BRACKET
Put the device on the mounting bracket.
Pull the device down carefully, so it locks in place.
 ACTIVATE THE DEVICE
If the device is to be supplied with power by a mains
adapter, plug the power adapter of the device into
a wall socket. If the device is to be powered via
PoE, switch on the PoE-Switch/ PoE-Injector which
is connected to the device. If the device is to be
powered via DIN-rail power supply, switch on the
DIN-rail power supply.
The Diagnostic-LEDs indicate whether the device is
supplied with power. These LEDs light up in blue color
immediately after you have connected the device to the
power supply. The device is now ready for operation.
If the Diagnostic LED does not light up, please check
the power supply. When using a wall-plug power
supply and not PoE please check whether you have
connected the positive pole and negative pole to the
device correctly.
Please note that the Diagnostic-LEDs are
different to the Status Bar LEDs. The LEDs
used for the LED Status Bar can illuminate
the Status Bar all-over and in almost any
color.
The device is ready for operation (booting up process,
any software updates, etc.) once it has emitted a short
diagnosis sound from the integrated loudspeaker. This
may last for up to 5 minutes. Should you not hear a
sound, please check the power supply. When using
a wall-plug power supply and not PoE please check
whether you have connected the positive pole and
negative pole to the device correctly.
 DOWNLOADING AND INSTALLING
THE APP
Download the ”DoorBird“ App by Bird Home
Automation onto your mobile device from the Apple
App Store or Google Play Store. You can always find
the most up-to-date version of the App manual on
www.doorbird.com/support
If you use WiFi for connecting the device to your
Internet Router, first go to the DoorBird App ” >
WiFi Setup” and follow the instructions.
If you have finished the WiFi setup or have connected
the device to your Internet Router by means of
a network cable, go to the DoorBird App “ >
Administration” and log in to the Administration
area of the DoorBird Video Door Station (using the
authentication details of the desired Video Door
Station!) you would like to pair the device with (using
the authentication details of the desired Video Door
Station!). To pair the device there, go to “Peripherals
> > Add”.
If you have problems adding the device to the App
please check if the device is online ( www.doorbird.
com/checkonline ). If the device is not online, please
check the WiFi or network cable connection again.
The device is designed to be installed in single-family
homes, offices and multi-unit residential dwellings.
Ring volume, ring tone etc. can be configured using
the touch screen of the device by the end-user. All
other configuration options like weather station,
user credentials, parental mode (PIN settings) etc.
are available for security reasons protected with
administrator credentials through the DoorBird
App, to avoid that residents misconfigure the device
accidentially or intentionally.
END-USER GUIDE
If you are an installer or
property manager, you can
download an end-user guide
which you can pass to the
resident here: www.doorbird.
com/downloads/end_user_
guide_a1101_en.pdf
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Doorbird A1101 Series IP Video Indoor Station at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Doorbird A1101 Series IP Video Indoor Station in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 7.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Doorbird A1101 Series IP Video Indoor Station

Doorbird A1101 Series IP Video Indoor Station Additional guide - English - 1 pages

Doorbird A1101 Series IP Video Indoor Station User Manual - English - 3 pages

Doorbird A1101 Series IP Video Indoor Station Additional guide - German, French, Spanish - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info