738926

Domo DO343DH Manual

37
Zoom out
Zoom in
Previous page
1/52
Next page
37
DO343DH
www.domo-elektro.be
EN
Continuous dehumidifying
Press this button to let the dehumidier run continuously for a maximum dehumidication until the water
reservoir is full. The buttons to set the air humidity cannot be used when the device is set to «continual».
Press this button again to cancel continual operation. You can also go back and use the buttons to set the
humidity.
The “Cont.” indicator light will light up.
Smart dehumidifying
With this function the dehumidier will check the humidity automatically and ensure a pleasant climate.
The level of humidity will be regulated between 45% and 55%. The level of humidity that was set with the
dehumidifying programme no longer applies.
The “SMD” (Smart Dehumidifying Mode) indicator light will light up.
3. Timer
TURBO
You can set the timer for a maximum of 24 hours. Pressing the “+” and “-” buttons will increase or
decrease the time by half an hour. With a setting of more than 10 hours, the time will increase or decrease
by an hour.
Timer for switching on automatically
Press the timer button while the appliance is o. The “On” indicator light above the timer button will light
up. The display will show the time set. This can be increased or decreased with the “+” and “-” buttons.
Once the set time has passed, the appliance will switch on automatically.
If so desired, you can now set the timer to switch it o automatically. Press the timer button another time
while the appliance is o. The “O” indicator light will light up. Set the time with the “+” and “-” buttons.
Once the set time has passed, the appliance will switch o automatically. Note: this time must be longer
than the time set for switching on.
Timer for switching o automatically
Press the timer button while the appliance is on. The “O” indicator light above the timer button will light
up. The display will show the time set. This can be increased or decreased with the “+” and “-” buttons.
Once the set time has passed, the appliance will switch o automatically.
If so desired, you can also set the timer to switch it on automatically. Press the timer button another time
while the appliance is on. The “On” indicator light will light up. Set the time with the “+” and “-” buttons.
Once the set time has passed, the appliance will switch on automatically. Note: this time must be longer
than the time set for switching o.
4. Fan
TURBO
Select the fan speed using the fan button. The appliance will reduce the humidity more quickly with a
higher ventilation speed. The indicator light above the button will light up:
· Low: low speed
· Med: medium speed
· Low & Med: high speed
5. “+” and “-” buttons
Use these buttons to set the desired humidity percentage. This can only be done in the Dehumidify mode.
See point 2. Mode.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo DO343DH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo DO343DH in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info