738926

Domo DO343DH Manual

36
Zoom out
Zoom in
Previous page
1/52
Next page
36
DO343DH
EN
USE
· Let the machine run for 24 hours when you use it for the rst time.
· The machine is designed to work in an environment with a temperature between 5°C and 35°C.
· If the machine is turned o and turned on again quickly, give the machine approximately 3 minutes to
restart correctly.
· Do not connect the dehumidier to a shared outlet which is used for other devices.
· Choose a suitable location with an easily accessible outlet.
· Connect the machine to an earthed outlet, where the voltage is consistent with the voltage listed on
the machine.
· Make sure that the water reservoir is in the correct position, otherwise it will not work properly.
CONTROL PANEL
20180315
(RoHS)
PC 0.25(
6
7
9
12
3
10
4
5
8
11
B
C
D
E
F
G
H
A
B
C
D
E
F
G
H
1
2
6
7
9
12
3
10
4
5
8
11

MODEL

MATERIAL


PART

REL

REV NO

WEIGHT

SCALE

AUTHORIZE

APPROVE

STANDARD

PROESS

CO.BY

DESIGN
1:1
S K

Guangdong Midea Air-conditioning Equipment Co.,Ltd
PART NO.
.
TOTAL SHEETS
NO OF SHEETS
.

1 1
A
1
2





MARKER
NUMBER
ECN NO
SIGNATURE
DATE
.
EU-CFZ0.6BD/N3-DF(A3)
EU-CFZ0.6BD/N3-DF(A3).PM-4(YS)ZDS
16020100000057
.
E 2017-03
1 QMK-J036.1013(QMK-J53.028) PVC PC
2 QMK-J036.1013(QMK-J53.028) PVC PC
4
5
6 ( ) 3M9448HK ()
7 SJ/T10628 6
8 RoHS QMK-J000.1002
9 REACH QMK-J000.1008 REACH
technical requirement(Ver.: E, 2017-03)
1. Material performance shall comply with QMK-J036.1013 QMK-J53.028) PVC PC General Technical Conditions for Labeling Parts
2. Adhesiveness of finished pieces shall comply withQMK-J036.1013(QMK-J53.028) PVC PC General Technical Conditions for Labeling Parts;
3. Finished pieces shall be level, kept in even thickness and clear side cut without any defect;
4. Surface of finished pieces shall be free from dent, scratch, vaporific effect, black spot, white spot and other impurities;
5. Color of finished pieces is ( ) and font color is . These colors shall be inspected according to sealed sample.
6. The front of finished pieces shall be (gross)finish, and the back of finished pieces shall
be coated with self-adhesive. The glue trademark is (3M9448HK ) and the undimensioned glue is (). The coverage of self-adhesive coating shall comply
with the drawing requirement, be kept in even thickness and be attached firmly with light pressure.
7. Undimensioned dimensional tolerance shall comply with Level (6), SJ/T10628 Plastics Dimensional Tolerance;
8. Materials subject to RoHS shall comply with QMK-J000.1002 Technical Standard for Restricted Hazardous Substance in the Products of MIDEA.
9. Materials subject to REACH shall comply with QMK-J000.1008 Technical Standard for REACH of MIDEA.
1
2
7
6
543
1. On/O Button
TURBO
Press this button to turn the dehumidier on and o. When you turn the machine on, the ‘power’ light will
turn on and the display will show the air humidity percentage at the moment.
2. Mode
TURBO
This button allows you to choose from 4 settings:
Dehumidify
The air humidity can be set from 35% relative humidity to 85% relative humidity at 5% intervals. For dryer
air, press “-” and set the air humidity to a lower percentage. (min. = 35)
For moister air, press “+” and set the air humidity to a higher percentage. (max. = 85)
The ideal humidity in the house falls approximately between 40% and 60%.
There will be no indicator light with this setting.
Dryer function
With this setting, the dehumidier operate at maximum capacity. The ventilation speed is high. Select
this setting to dry moist clothes more quickly. Position the dehumidier with the air exhaust aimed at the
clothes. Leave approximately 30 to 50 cm between the appliance and the clothes.
Caution: do not cover the openings of the appliance. A lack of air circulation can cause overheating and
re. Make sure that no water gets into the appliance; this may cause electrical shocks.
The “Dryer” indicator light will light up.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo DO343DH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo DO343DH in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info