Manual Dometic TEC40 (page 25 of 528) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

517881

Zoom out

Zoom in

1/528

TEC 40D

- 27 -

Use, maintenance and installation instructions

– Protect the connections with specic grease.

– Use a fuse with the appropriate characteristics (see “Technical data”) and install it in line

near the positive pole of the starter battery, in order to protect the equipment’s electrical

system.

ELECTRICAL CONNECTION TO THE EXTERNAL NETWORK

– A relay or switch must be installed on the electric system (for instance, the Dometic switch,

code AG 113, supplied with the equipment) in order not to damage the generator when

the external power supply network is connected; in this case, connect the generator to

the normally closed contacts of switch AG 113.

– The electrical connection must be made in compliance with current laws in the country

of use.

– For proper installation by the end user, it is recommended that you request the technical

assistance of the dealer or a specialist technician.

– For 230 V use an approved cable, whose section is shown in the table. Refer to the

instructions and diagram in the following pages for the connection to the Dometic switch,

code AG 113.

Important

To use electric power from the external network, follow the instructions given below

with care.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dometic TEC40 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 62,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dometic TEC40 Manual

Product: