Manual Dometic TEC40 (page 24 of 528) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

517881

Zoom out

Zoom in

1/528

TEC 40D

- 26 - Istruzioni per uso, manutenzione e installazione

CONNECTING THE BATTERY CHARGER

– The unit is set up to provide for automatic battery recharging. If this function is to be

used, proceed as follows.

– Choose the cables of the correct section (see “Technical data”).

– Connect the electric cable to the positive pole of the battery to be charged. If the battery

to be charged is not the one used to start the generator, the negative terminal of that

battery must be connected to the generator mass point.

CONNECTING THE FUEL INDICATOR

– Only use the indicator connection if there is a fuel level probe in the tank used for the

generator.

– Connect the proble cable (e.g. oat) to the relevant terminal (see gure above).

CONNECTING THE BATTERY

To start the equipment, use a battery with the appropriate characteristics (see “Technical

data”).

Use regulation sheathed electrical cables, with the appropriate characteristics (see “Technical

data”).

Proceed as indicated.

– First conne c t the

positive cable (+) of the

battery to the terminal

marked with the symbol

“+” on the generator.

– Then con nect the

negative cable (-) of the

battery to the terminal

marked with the symbol

“-” on the generator.

IDM-4020100 0900.pdf

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dometic TEC40 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 62,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dometic TEC40 Manual

Product: