652304
13
Zoom out
Zoom in
Previous page
1/14
Next page
13
At the first starting up it may happen that the
message „BAT.1 LOW/FAIL appears. The message
will disappear as soon as the battery is charged.
The battery should be pre-emptively replaced
every 2 years. This replacement must only be
carried out by a recognised service technician.
Before dismantling the battery the appliance
must be switched off and the plug pulled out.
The battery is a lead-acid storage battery that
must be disposed of separately in the case of a
fault.
RReecchhaarrggeeaabbllee bbaatttteerryy
The monitoring functions of the electronics
during an interruption of the power supply for at
least 48 hours are maintained by an integrated
rechargeable battery.
This battery is automatically charged when the
appliance is connected.
If the capacity of the battery is no longer
sufficient to take over the control function, the
error message “BAT.1 LOW/FAIL appears on the
display.
Resting state
Alarm
TTEEMMPPEERRAATTUURREE--AALLAARRMM
DDOOOORR--AALLAARRMM
Resting state
Alarm
PPOOWWEERRFFAAIILL--AALLAARRMM
EExxtteerrnnaall AAllaarrmmffuunnccttiioonn
There are two terminals with three floating
contacts on the back of the unit that can be used
to trigger an additional external alarm (visual or
audible).
The upper contacts correspond to temperature-
and door-alarm, the lower contacts correspond to
a powerfail-alarm.
Pressing the ENTER-key in an alarm situation
only switches off the internal audible alarm. The
key does not interfere with the external alarm.
The external alarm signal is only switched off
once the cause of the alarm has been eliminated.
A voltage of between 12V DC and a maximum of
250V AC can be connected at the contacts. The
maximum load must not exceed 8A. The minimum
power rating is 100mA / 5V.
SSaaffeettyy tthheerrmmoossttaatt
All units are fitted with a safety thermostat. This
thermostat switches off the compressor as soon
as the inside temperature falls below +2°C, to
prevent the goods being harmed by freezing.
IInntteerriioorr ffiittttiinnggss
Depending on the model series, height-
adjustable drawers or racks are included as
standard fittings.
The load must be evenly distributed over the
drawers or racks.
Pull out the drawers using the handles only.
To remove the drawers (e.g. to clean them), pull
the draw out to the stop and then lift.
The appliances are designed in such a way that
they have optimal function with the original
fittings. If interior fittings from other suppliers
are to be used, this must be definitely agreed
with the manufacturer.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dometic ML155 SG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dometic ML155 SG in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dometic ML155 SG

Dometic ML155 SG User Manual - German - 14 pages

Dometic ML155 SG User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info