549152
5
Zoom out
Zoom in
Previous page
1/28
Next page
5
YY
YY
Y
English
L-2230 Operation
2.01 Operator Controls and
Display Panel
1-POWER BUTTON The Power Button is used to toggle
between the On and Off Modes. Press the Power Button
once to toggle the unit to the On Mode.
2-UP BUTTON Momentarily press and the set point will
appear in the display. Press and hold the Up Button the
set point will scroll to the upper limit. The set point
increases one degree each time the Up Button is
pressed and released.
3-DOWN BUTTON Momentarily press and release to
display the set point. The set point is decreased one
degree each time the Down Button is pressed and
released. Press and hold the Down Button and the set
point will scroll to the lower limit.
4-FAN BUTTON Press and release the Fan Button to
advance from auto fan to manual fan. Press and release
the Fan Button to advance the manual fan speeds, from
low to high. Press and release again to return to the
automatic Fan Mode. The selected Fan Mode is indi-
cated by the Auto and Manual Fan LEDs. The fan
operating mode can be changed from continuous (“con”)
to cycle-on-demand (“CYC”) by pressing and holding the
fan button for 5 seconds.
5-MODE BUTTON The Mode Button is used to select
one of the four operating modes. Press and release the
Mode Button and the Elite will advance to the next
mode. Continue to press and release the Mode Button
until the desired operating mode is reached. The mode
selected is indicated by the Mode LED, i.e., Cool, Heat,
Automatic or Moisture Mode.
6-THREE DIGIT SEVEN SEGMENT DISPLAY The inside
air temperature is displayed in the window whenever the
control is turned on.
The display also indicates program information, fault
codes and outside air temperature when the optional
outside air sensor is installed.
The display momentarily indicates the set point when the
Up or Down Button is pressed.
When the control resumes operation after a power
interruption all the Display LEDs will turn on for one
second. This is a normal operating condition and is
referred to as Power On Reset.
7-MANUAL INDICATION One of the three fan LEDs will
be lit when manual fan operation is selected.
8-AUTO FAN LED The Auto Fan LED is illuminated when
automatic fan speed operation has been selected.
9-AUTO MODE LED When the Auto LED is lit the unit
will automatically switch to heating or cooling when
required.
10-COOL MODE LED The Cool Mode LED will be lit
when Cool Mode is selected or the unit is in a cooling
cycle.
11-HEAT MODE LED The Heat Mode LED will be lit
when Heat Mode is selected or the unit is in a heating
cycle.
2.0 Elite Controls • Basic Operation
6-Display
2-Up
1-Power 3-Down
4-Fan
5-Mode
9-Auto Mode LED
10-Cool Mode LED
11-Heat Mode LED
12-Moisture Mode LED
8-Auto Fan LED
7-Manual Fan LEDs (high, medium, low)
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dometic L-2230D Elite at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dometic L-2230D Elite in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dometic L-2230D Elite

Dometic L-2230D Elite User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info