614840
62
Zoom out
Zoom in
Previous page
1/188
Next page
MANUTENCIÓN USO
INSTALACIÓN
62
ESPAÑOL
MODELO
CU400PE - CU400BPE - CU401PE - CU402PE
CU403PE - CU404PE - CU404PEMW
CU405PEMW - CU407PEMW - CU414PE
TENSIÓN NOMINAL
220-240V~ 50/60Hz 800 W
POTENCIA NOMINAL
FIJACIÓN
ESTE APARATO DEBE SER FIJADO AL MUEBLE POR MEDIO DE TORNILLOS
COMO SE DESCRIBE EN FIG. 3 - PAG. 177.
CONEXIÓN ELÉCTRICA
ESTE ARTEFACTO DEBE ESTAR CONECTADO SOLAMENTE A UN GENERADOR DE
12 V . EL CIRCUITO DEVE ESTAR PROTEGIDO POR UN FUSIBLE DE 3 Amperios.
OBSERVAR LA CORRECTA POLARIDAD EN LA CONEXIÓN!
NO CONECTAR ABSOLUTAMENTE EL ARTEFACTO A LA TENSIÓN DE RED (230 V~)
ESTO PRODUCIRÍA LA DESTRUCCIÓN DEFINITIVA DE LOS COMPONENTES Y UN
PELIGRO PARA EL USUARIO.
Para la conexión eléctrica del artefacto emplear un cable doble rojo y negro de 1,5 mm
2
y conectarlo al grupo de
bornes identificado con "+ 12 V – " colocado en la parte posterior del artefacto. El terminal rojo es el polo positivo
y el terminal negro el polo negativo.
BAJA TENSIÓN 12 V
Este capítulo se refiere exclusivamente a los modelos que presentan en la etiqueta de identificación pegada en el
artefacto la escritura 12 V .
ALTA TENSIÓN 220-240 V~
Este capítulo se refiere exclusivamente a los modelos de la siguiente tabla:
Realizar la conexión a la red de alimentación por medio de un enchufe.
Si el cable de alimentación (H05RR-F 3x0,75mm
2
) está dañado, es necesario hacerlo sustituir por el fabricante
contactando el servicio de asistencia técnica o contactando una persona cualificada, para prevenir todo tipo de riesgo.
PARA LA CONEXIÓN DIRECTA A LA RED ES NECESARIO DISPONER DE UN
DISPOSITIVO QUE ASEGURE LA DESCONEXIÓN DE LA RED, CON UNA DISTANCIA
DE APERTURA DE LOS CONTACTOS QUE PERMITA LA DESCONEXIÓN COMPLETA
EN LAS CONDICIONES DE LA CATEGORÍA DE SOBRECARGA III, CONFORME CON
LAS REGLAS DE INSTALACIÓN.
EL CABLE DE ALIMENTACIÓN DEBE ESTAR POSICIONADO DE MANERA TAL QUE
NO ALCANCE EN NI NGÚN PUNTO LA TEMPERATURA DE 75K.
EL ENCHUFE DEBE DE SER ACCESIBLE DESPUÉS DE LA INSTALACIÓN.
ANTES DE INTERVENIR EN EL ARTEFACTO DESCONECTARLO SIEMPRE DE LA
ALIMENTACIÓN ELÉCTRICA.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dometic CU402PE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dometic CU402PE in the language / languages: All languages as an attachment in your email.

The manual is 15,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info