507712
5
Zoom out
Zoom in
Previous page
1/52
Next page
5
Always wear - safety shoes or boots (G) with steel toes, non-skid soles, and leg
protectors when working with the Power Cutter. Safety shoes equipped with a
protective layer provide protection against cuts and ensure a secure footing.
Always wear a - work suit (H) of sturdy material.
Fuels / Refuelling
Go to a safe, level place before refuelling. - Never refuel while on scaffolding,
on heaps of material, or in similar places!
Switch off the engine before refuelling the Power Cutter. -
Do not smoke or work near open res (6). -
Let the engine cool down before refuelling. -
Fuels can contain substances similar to solvents. Eyes and skin should not come -
in contact with mineral oil products. Always wear protective gloves when refuelling
(not the regular work gloves!). Frequently clean and change protective clothes.
Do not breathe in fuel vapors. Inhalation of fuel vapours can be hazardous to your
health.
Do not spill fuel. If a spill occurs, clean off the Power Cutter immediately. Fuel -
should not come in contact with clothes. If your clothes have come in contact with
fuel, change them at once.
Ensure that no fuel oozes into the soil (environmental protection). Use an -
appropriate base.
Refuelling is not allowed in closed rooms. Fuel vapors will accumulate near the -
oor (explosion hazard).
Ensure to rmly tighten the screw cap of the fuel tank. -
Before starting the engine, move to a location at least 3 meters -
(approx. 3 1/4 yards) from where you fuelled the Power Cutter (7), but not within
the extended swing range of the cutting disc (direction of sparks).
Fuel cannot be stored for an unlimited period of time. Buy only as much as will be -
consumed in the near future.
Use only approved and marked containers for the transport and storage of fuel. -
Keep fuel away from children! -
Putting into operation
Do not work on your own. There must be someone around in case of an -
emergency (within shouting distance).
Observe all anti-noise regulations when working in residential areas. -
Never use the Power Cutter near inammable materials or explosive gases! -
The Power Cutter can create sparks leading to re or explosion!
Make sure that all persons within 30 meters (33 yards), such as other workers, -
are wearing protective gear (see “Protective equipment”) (8). Children and other
unauthorized persons must remain more than 30 meters away from the working
area. Keep an eye out for animals as well (9).
Before starting work the Power Cutter must be checked for perfect function -
and operating safety according to the prescriptions.
In particular, make sure that the cutting wheel is in good condition (replace
immediately if torn, damaged or bent), the cutting wheel is properly mounted, the
protection hood is locked in place, the hand guard is properly mounted, the V-belt
has the proper tension, the throttle moves easily and the grips are clean and dry,
and the combination switch functions properly.
Start the Power Cutter only after complete assembly and inspection. Never use -
the Power Cutter when it is not completely assembled.
5
6
7
8
9
3 meters
= wearing Protective Equipment
30 m
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dolmar PC-7614V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dolmar PC-7614V in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info