Manual Dolmar ES-42A (page 26 of 189) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

507645

Zoom out

Zoom in

1/189

................... Caution: kickback!

................... Protect against rain and damp!

................... Wear a helmet, goggles and ear protec-

tion!

................... Wear safety gloves!

................... Withdraw the mains plug!

................... First aid

......... Recycling

................... CE marking

........... Maximum permissible length of cut

.......... Direction of chain travel

................... Chain oil

............. Chain brake released/applied

................... Prohibited!

Intended use

The tool is intended for cutting lumbers and logs.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

For public low-voltage distribution systems of

between 220 V and 250 V.

Switching operations of electric apparatus cause voltage

fluctuations. The operation of this device under unfavor-

able mains conditions can have adverse effects to the

operation of other equipment. With a mains impedance

equal or less than 0.35 Ohms it can be presumed that

there will be no negative effects. The mains socket used

for this device must be protected with a fuse or protective

circuit breaker having slow tripping characteristics.

ADDITIONAL SAFETY RULES

ENB098-1

1. Read the instruction manual in order to familiarize

yourself with operation of the chain saw.

2. Before using the chain saw for the first time,

arrange to have instruction in its operation. If this

is not possible, at least practice cutting round tim-

ber on a trestle before beginning work.

3. The chain saw must not be used by children or

young persons under 18 years of age. Young per-

sons over 16 years of age may be exempted from

this restriction if they are undergoing training

under the supervision of an expert.

4. Working with the chain saw requires a high level

of concentration. Do not work with the saw if you

are not feeling fit and well. Carry out all work

calmly and carefully.

5. Never work under the influence of alcohol, drugs

or medication.

Proper use

1. The chain saw is intended solely for cutting wood.

Do not use it for example to cut plastic or porous

concrete.

2. Only use the chain saw for operations described

in this instruction manual. Do not, for example,

use it to trim hedges or for similar purposes.

3. The chain saw must not be used for forestry work,

i.e. for felling and limbing standing timber. The

chain saw cable does not provide the operator

with the mobility and safety required for such

work.

4. The chain saw is not intended for commercial use.

5. Do not overload the chain saw.

Personal protective equipment

1. Clothing must be close-fitting, but must not

obstruct mobility.

2. Wear the following protective clothing during

work:

• A tested safety helmet, if a hazard is presented by fall-

ing branches or similar;

• A face mask or goggles;

• Suitable ear protection (ear muffs, custom or mould-

able ear plugs). Octave brand analysis upon request.

• Firm leather safety gloves;

• Long trousers manufactured from strong fabric;

• Protective dungarees of cut-resistant fabric;

• Safety shoes or boots with non-slip soles, steel toes,

and cut-resistant fabric lining;

• A breathing mask, when carrying out work which pro-

duces dust (e.g. sawing dry wood).

Protection against electric shock

................... The chain saw must not be used in wet

weather or damp environments, as the

electric motor is not waterproof.

1. Only plug the saw into earthed sockets in tested

electrical circuits. Check that the system voltage

matches that on the rating plate. Ensure that a

16 A line fuse is fitted. Saws used in the open air

must be connected to a residual current-operated

circuit-breaker with an operating current no higher

than 30 mA.

................... Should the connecting cable be dam-

aged, withdraw the mains plug immedi-

ately.

Safe working practices

1. Before starting work, check that the chain saw is

in proper working order and that its condition

RE Y

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dolmar ES-42A in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dolmar ES-42A Manual

Product: