507649
21
Zoom out
Zoom in
Previous page
1/28
Next page
21
Replacing the starter cable
- Thread in a new cable (4 mm/.16" dia. x 1000 mm/39" long)
as shown in Figure B and tie the ends as shown.
- Pull knot (B/1) into the cable pulley (B/3).
- Pull knot (B/2) into the cable grip (B/4).
- Wind the cable around the pulley in the direction shown by
the arrow. Pull the cable out from the pulley by the grip, then
hold the pulley Þ rmly and wrap the cable around it another
three times.
CAUTION: Danger of injury! Secure the cable grip when
pulled out! It will whip back if the cable pulley is released
by accident.
NOTE: With the cable pulled all the way out, it must still be
possible to turn the pulley another 1/4 turn against the return
spring.
Replacing the return spring
- Remove the fan housing (see above under "Replacing the
starter cable").
- Take off the circlip (C/1) and washer (C/2) (circlip pliers,
see "Accessories").
- Remove the cable pulley (C/3).
- Unscrew screws (C/4) and carefully remove spring housing
(C/5) with spring.
CAUTION: Danger of injury! If the spring is broken it may
pop out!
NOTE:
The old spring and spring housing should be recycled.
Replacement springs come already installed in a new spring
housing. Before installing, grease the spring lightly with mul-
ti-purpose grease, order No. 944 360 000.
- Assemble in reverse order. When putting the cable pulley
back on, turn it slightly until you feel it catch.
- Wind on the starter cable as described above under "Re-
placing the starter cable."
Mounting the fan housing
- Push the tab (D/1) extending out from the edge of the fan
housing (D/3) under the hood (D/2).
- Position the screw holes.
- Push the fan housing (D/3) gently and pull the starter grip
until the starter catches.
- Screw in the four fastening screws tightly.
- Unscrew the four screws (A/1) holding down the fan hous-
ing (A/2). Lift the housing slightly, pull in the direction of the
arrow, and remove.
- Remove all pieces of cable.
A
B
1
2
C
D
3
45
2
1
2
1
3
4
3
1
2
RE Y
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dolmar 115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dolmar 115 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dolmar 115

Dolmar 115 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info