Manual Dogtrace d-fence 6th Sense (page 16 of 27) (English)

766080

Zoom out

Zoom in

1/27

Zones settings

The width of the warning and the correction zone can be set easily on

the transmitter unit. Both zones are independent of each other making it

possible to set either the warning zone

or the correction zone. Both zones have

range settings from 0 to a minimum 7 m.

Maximum width depends on the length

and the cross section of the antenna wire.

We recommend the use of the test

discharge lamp to set the zones width.

Place the test discharge lamp in contact

with each of the contact points as shown

in the picture (before doing so, make

sure that the device is not active - remove the battery from the receiver or

switch the transmitter unit o).

Now you can plug in the antenna connector with an antenna loop into

the antenna socket transmitter unit.

Inset the battery into the receiver and switch the transmitter unit on by

pressing the button.

Set the receiver in the mode 1 - 8 (see the section Stimulation Impulse

Setting)

From Main menu select Zones Settings. If the antenna wire is incorrectly

connected or interrupted, the unit will beep and symbol will be

displayed on the screen.

The widths of warning and correction zone are set by default to value 0.

Pressing ENTER in the Zones Settings menu moves the focus on the

screen to the Warning zone setting.

Select the distance where you want to define the boundary of the

warning zone, hold the receiver with the sign "d-fence" towards the

antenna wire about 30 cm above the ground or as high as where the dog

wears the receiver. Adjust the zone setting (0 - 600) on the transmitter

unit by pressing the buttons until the receiver emits a warning

sound signals.

Press ENTER to confirm your settings and to move focus to Correction

zone setting.

Select the distance where you want to define the boundary of the

correction zone, hold the receiver with the sign "d-fence" towards the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dogtrace d-fence 6th Sense in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dogtrace d-fence 6th Sense Manual

Product: