766080
15
Zoom out
Zoom in
Previous page
1/27
Next page
15
Setting up the transmitter unit for a short or a long installation of an
antenna wire.
d-fence 6th SENSE - 2nd generation enables you to switch over the
transmitter unit power, which is generated into the antenna wire. This
function allows a ne setting of warning and correction zone for a short
installation (up to 400 m wire installation) and also for a long installation
(above 400 m wire installation). The newly purchased transmitter unit is
factory pre-set for the installation up to 400 m. When your installation is
longer, it is necessary to make the following settings.
Setting process:
Press MENU to enter the Main menu, by pressing buttons
select Conguration, press ENTER to conrm your settings.
By pressing ENTER button choose Loop.
If your antenna wire installation is shorter than 400 m, select by pressing
buttons UP TO 400 m. If your antenna wire installation is
longer than 400 m, select OVER 400 m.
Use MENU button to return to the Main menu.
Important: In the Main menu – Zones settings – is the current setting
indicated by:
- installation up to 400 m
- installation over 400 m
Calibration of the loop:
In the Main menu, select Measuring.
Disconnect the antenna connector with the installed loop (antenna
wire).
Press ENTER.
Check that you have disconnected the antenna connector from the
transmitter unit.
Press ENTER.
In the bottom line you will see a conrmation „Calibration successful!“
Important: The loop of the transmitter unit needs to be calibrated after
each adjustment of the antenna wire installation length.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dogtrace d-fence 6th Sense at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dogtrace d-fence 6th Sense in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info