766075

Dogtrace d-control professional 2000 Manual

8
Zoom out
Zoom in
Previous page
1/20
Next page
8
Transmitter preparation
Battery insertion and replacement
1. Screw out 4 screws from the battery cover using a cross-head screwdriver and
remove the lid.
2. Insert two alkaline AAA batteries into the battery compartment with a correct
polarity (according to the polarity indicated with the “+” symbol in the
battery compartment). Wrong polarity may damage the unit.
3. Make sure that the rubber seal is clean and correctly seated in its groove.
4. Put the battery cover back and screw in the 4 screws adequately.
Checking the transmitter battery status
The battery power indicator on LCD shows the battery status:
– fully charged battery
– medium charged battery
– at battery
If the battery is at, insert new AAA alkaline batteries into the battery compartment.
Transmitter settings
1. Switching ON / OFF – press down for 1 second the button .
2. Selection of the function button – by repetitive short pressing of the button
can be choosen one of the function buttons: A1 / A2 / B1/ B2. The selected function
button is shown on the LCD - letter A (front buttons A1 / A2), or letter B (side buttons
B1 /B2). Selected button is indicated on LCD with the letter A (front buttons A1 / A2)
or with the letter B (side buttons B1 / B2) and by ashing symbol in the rst or second
line of the LCD (rst line for buttons A1 / B1, second line for buttons A2 / B2).
Buttons A1 / A2 are designed for a dog A and buttons B1 / B2 are designed for a
dog B.
Example: When in the rst line of the LCD ashes letter A together with the
command symbol – the device is ready for setting of the A1 function button.
TIP: When using the device for training one dog, you can program function
buttons B1 / B2 with the same receiver (collar) as function buttons A1 /A2 - see
chapter Programming function buttons B1 /B2 (or second transmitter) with the
rst receiver
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dogtrace d-control professional 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dogtrace d-control professional 2000 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info