Manual Dogtrace d-control professional 1000 mini (page 14 of 20) (English)

766072

Zoom out

Zoom in

1/20

Momentary / continuous stimulation:

This function enables you to activate a safe stimulation warning impulses in the

receiver transmitted by two contact points.

The purpose of stimulation impulses is not to hurt the dog, but this impulse is very

unpleasant for your dog. Your dog will soon create a connection between your

command, an audible beep tone and the unpleasant feeling on the neck. Later on,

you will use only a minimum of these stimulation impulses because the dog will

connect them with disobeying your command.

While transmitting the stimulation impulse, the red LED indicator of the receiver is

emitting a light.

Momentary - stimulation impulse takes only 0,1 second no matter how long the

button is held.

Continuous stimulation - a receiver emits a stimulation impulse as long as the

button is pressed, but for safety reasons, it is limited to 8 seconds.

Choice of stimulation level

It is important to choose the right intensity of the stimulation impulse for your

dog, therefore it is gently adjustable in 40 levels. Because every dog has a dierent

sensitivity, you can not estimate the proper stimulation level in advance. Begin at

the lowest levels. If your dog does not respond at a low level, increase it gradually

until you can see a moderate reaction. The stimulation impulse should never cause

your dog a pain or a fear.

Light:

For an easy localization of your dog in the dark, this function provides several modes

of LED light. The LED - diodes are placed in the transparent receiver housing of the

collar. The transmitter also allows you to set a dierent interval of ashing when

using two collars at the same time - you can easily spot your dogs according to the

ashing interval (example: a dog A - ashes once in a second and a dog B - ashes

once in two seconds).

TIP: The command stimulation impulse in level 00 does not emit any stimulation

impulses. If you do not want to use the stimulation impulses, set a short and a

long stimulation impulse on the 00 intensity.

* Flashing is switched o by repetitive pressing down the button

Mode Light is ashing Period Limit

1 as long as the button is pressed down and held 0,5 s 30 s

2after the button is pressed down, the light starts ashing * 2 s -

3 2 x 0,5 s -

4 10 x 2 s -

5 as long as the button is pressed down and held 0,1 s 30 s

6 after the button is pressed down, the light starts ashing * 1 s -

7 2 x 0,1 s -

8 10 x 1 s -

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dogtrace d-control professional 1000 mini in the language / languages: English as an attachment in your email.

The manual is 1,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dogtrace d-control professional 1000 mini Manual

Product: