594198
50
Zoom out
Zoom in
Previous page
1/52
Next page
Appendix
50
©
2015 DJI. All Rights Reserved.
3.8 Failure to share.
Solution: Make sure your mobile device has access to the Internet.
3.9 Some Android devices have a problem connecting to the Phantom 2 Vision+ Wi-Fi Extender.
Solution: Some Android devices do not allow for both a Wi-Fi connection and a mobile data connection at the same time.
When trying to connect to the Phantom 2 Vision+ Wi-Fi network, most devices will check whether an Internet connection
has a certain Wi-Fi setting enabled, e.g. Auto network switch or Test for Internet connection. If no Internet connection
is found because the Phantom 2 Vision+ creates a non-routable connection it will drop the Phantom 2 Vision+ Wi-
Fi network connection and scan for the next available connection. Example: For the Samsung Note 3, carry out the
following procedures to solve this issue. Tap Settings -> Wi-Fi, and then tap the “Menu” button. Select “Advanced”
then uncheck the “Auto network switch”. You might see a warning that indicates the Internet connection is unstable this
message can be ignored.
3.10 App tips for mobile devices.
Solution: If using the App on multiple mobile devices turn off the App on the rst mobile device then turn it on the second
one to ensure normal functions on the second mobile device.
3.11 How to land the aircraft more smoothly?
Solution: First pull the throttle stick position down to lower than 5%, then execute the CSC command to stop the motors.
3.12 Why is the discharge time of a battery not zero when unused?
Solution: A battery aging test is performed prior to delivery which affects the discharge time of the new battery. This is
why the discharge time of a new battery is not zero. The battery is okay to use.
3.13 Do I need extra hardware to utilize ground station?
Solution: No extra hardware is required.
3.14 Does ground station support caching map data ofine?
Solution: Yes, user can cache map data in ground station for future use.
3.15 What if I accidently exit DJI Vision App in ground station mode?
If DJI Vision App is closed when aircraft is executing ight mission, aircraft continues with the remaining ight mission.
If DJI Vision App is closed and failed to re-connect with aircraft within 1 minute, aircraft returns home point automatically.
3.7 iOS Albums fail to synchronize.
Solution: Reset the settings of your mobile device as illustrated below. Enable the Settings -> Private -> Photos -> DJI
VISION. Otherwise Albums will fail to synchronize with your mobile device.
Figure 116
Figure 117
Figure 118
Appendix
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DJI Phantom 2 Vision plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DJI Phantom 2 Vision plus in the language / languages: English as an attachment in your email.

The manual is 20,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DJI Phantom 2 Vision plus

DJI Phantom 2 Vision plus User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info