652870
9
Zoom out
Zoom in
Previous page
1/29
Next page
4.0.1
4.0.2
4.0.3
4.0.4
4.0.5
4.0.6
4.0.7
4.1.1
4.1.2
4.1.3
4.1.4
The adhesive electrode pads must not be applied directly on the heart region or
positioned directly next to the heart region in order to prevent current flowing
through the heart region.
The adhesive electrode pads must not be applied in such a manner that the
current can directly flow through the brain, e.g. on both templates.
Do not apply the adhesive electrode pads on the following parts of the
body: a. on and in the mouth, b. eyelids, c. front neck area, d. larynx,
e. throat area, f. carotid artery, g. heart region, h. genitalia (genital
organs: penis, testicles, ...), i. fingers, j. pacemakers.
The adhesive electrode pads must not be applied on parts of the body with skin
inflammations or open and fresh wounds or fresh scars.
4.1 Areas where the adhesive electrode pads must
not be applied
Please ensure that the painful part of the body is enclosed by the positions of the
electrodes during a TENS therapy. For an aching group of muscles, you should
apply the electrodes in such a manner that the affected muscles are also enclosed
by the electrodes.
Do not pull the TENS stimulators if you wish to remove the adhesive electrode
pads from the skin! To this end, lift the adhesive electrode pad in the area of the
arrow with the "PULL" imprint and remove it carefully from the skin. Please make
sure that you do not touch the adhesive surfaces with your fingers. Afterwards,
stick the adhesive electrode pads back onto the protective foil and store them in a
cool and dry place.
The adhesive electrode pad consists of two individual electrodes (+ (positive) and
- (negative) pole) which are separated by a white strip in the middle. The
distance between the electrodes has already been defined by the design and,
thus, cannot be changed.
The adhesive electrode pads must not be resized, e.g. by cutting off parts.
Do not use any adhesive electrode pads of an electrode size smaller than 90x57
mm; otherwise, too high a current density can flow and injuries may be caused.
Smaller electrodes falling below a minimum size of 90x57 mm may only be used
if approved by the doctor in charge. In this respect, it is absolutely necessary to
observe the safety instructions of the manufacturer of the respective adhesive
electrodes.
In order to position the adhesive electrode pads correctly, use the information as
well as the figures on page 20 and 21 for TENS therapies intended as application
examples as guidance.
Each person reacts differently to an electric nerve stimulation. The positioning of
the adhesive electrode pads might thus deviate from the standard positions. If
the therapies are not successful, please consult your doctor as to which
positioning techniques are most suitable for you.
4.0 Areas where the adhesive electrode pads are applied
SAFETY INSTRUCTIONS
9
GB
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dittmann TGS 440 Radio Tens Device at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dittmann TGS 440 Radio Tens Device in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info