652870

Dittmann TGS 440 Radio Tens Device Manual

8
Zoom out
Zoom in
Previous page
1/29
Next page
3.8.1
3.8.2
3.8.3
3.8.4
3.8.5
3.8.6
3.8.7
3.8.8
3.8.9
3.9.0
3.9.2
Avoid any contact with the adhesive electrode pads during the therapy. Under
certain circumstances, touching the electrodes results in a short circuit involving
an excessive current density. This excessive current density might cause burns
and injuries!
Please remove the protective foil before applying the adhesive electrode pads on
the skin. The adhesive strength of the electrode pads depends on the condition of
the skin, storage and number of therapy sessions. If the adhesive electrode pads
do no longer stick completely on the skin surface, they must be replaced by new
adhesive electrode pads. The adhesive electrode pads must lie completely flat
against the skin in order to avoid locally high current densities which might result
in skin burns. After the application has been completed, stick the adhesive
electrode pads back on the protective foil and keep them in a protected
environment to ensure that they cannot dry out. Thus, their adhesive strength
can be maintained for a longer period of time.
Each person reacts differently to an electric nerve stimulation. If the therapy is
not successful, please seek medical advice.
The adhesive electrode pads can also be connected to the TENS stimulators or
disconnected from them using the press stud connection.
Carefully remove the adhesive electrode pads from the TENS stimulators in order
to prevent them from being damaged.
Only connect the adhesive electrode pads to the TENS stimulators if they have
been switched off!
Before using the adhesive electrode pads, the areas of the skin on which you wish
to apply them must be thoroughly cleaned and dried. These areas of the skin
should be greaseless and clean.
Using the radio TENS device may result in skin irritations. If skin irritations such
as redness, blisters or itching occur, you should no longer use the radio TENS
device and seek medical advice! Do not apply the adhesive electrode pads
permanently on the same part of the body, as this can lead to skin irritations.
If you wish to reposition the adhesive electrode pads during the therapy, make
sure that you switch off the TENS stimulators first.
The adhesive electrode pads included in the scope of delivery may only be
connected to the radio TENS device TGS 440. Please ensure that the TENS
stimulators are always switched off when applying or removing the adhesive
electrode pads.
For the radio TENS device TGS 440, only use the adhesive electrode pads
developed especially for this device.
3.8 Usage of the radio TENS device
SAFETY INSTRUCTIONS
8
GB
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dittmann TGS 440 Radio Tens Device at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dittmann TGS 440 Radio Tens Device in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info