499507
32
Zoom out
Zoom in
Previous page
1/44
Next page
- 32 -
0DT829 15/10/2012
49E
Trimmer Description
TC
Setting automatic closing time. From 0 to 30 s.
Note: after the activation of the stop command, once contact 1-9 has closed again, the
automatic closing is only activated after a total, partial or step-by-step opening command.
RP Motor partial opening adjustment. From 0 to 30 s.
Jumpers Description OFF ON
SO
Reversal safety switch
function.
With the automation blocked, if the
contacts 41-8 are open, it is possible to
activate the opening operation.
With the automation blocked, if
the contacts 41-8 are open, any
operation is impossible.
EO Electric brake.
Do not use Normal.
0 s 30 s
0 s 30 s
SIGNALS AND SETTING
Button LED
Starts the opening operation. The green LED on indicates the presence of the 24 V=power supply.
Starts the partial opening operation.
Starts and stops the STOP operation.
the red LED on indicates that the STOP has been activated.
the ashing red LED indicates that the safety devices have been activated.
Starts the closing operation.
ON
 Description OFF ON
DIP 1  Step-by-Step Opening
DIP 2
Restore automatic closing
time.
Do not use 100 %
DIP 3 
Disabled during
opening
Enabled for both
opening and closing
DIP 4 Application type. Do not use Rapid door
DIP 5 Dynamic brake. Disabled Do not use
DIP 6 Double speed Disabled Do not use
LED On Flashing
POWER 24 V= power supply. /
SA
Indicates that at least one of the safety
contacts is open. ( 6 - 8 - 9 )
- Indicates the STOP operation activated by pushbutton panel
PT4 (if present).
- If the AUTOTEST device is installed, this indicates a safety
test failure (terminal 41).
- On power on, the LED ashes to indicate the number of
operations performed:
each rapid ash = 10000 operations
each slow ash = 100000 operations
IN
Activated at every command and
adjustment to the dip-switch and jumper.
/
11
Indicates that the 0-11 limit switch
contact is open.
/
12
Indicates that the 0-12 limit switch
contact is open.
/
17
Indicates that the 0-17 limit switch
contact is open. (not used)
/
1 2 3 4 5 6
ON


setting
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DITEC Traffic CM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DITEC Traffic CM in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info