665110
14
Zoom out
Zoom in
Previous page
1/146
Next page
Maintaining the appliance
Emptying the dust bin
1
Switch o the appliance and pull the plug from
the socket.
2
Press the dust bin release catch
(Fig.
1
/
5
) and remove the dust bin from its console
in the appliance (Fig.
13
).
3
Place dust bin closely
above a waste bin and release the dust bin (Fig.
14
).
4
Dispose of the contents of the dust bin in a waste
bin. Gently tap out the dust bin to remove any soil-
ing.
5
Close the emptied dust bin.
6
Re-insert the
dust bin into its console in the appliance so that you
feel it click into place.
Cleaning the separator and lter
NOTE:
The appliance, the separator and the pre-motor
lter should be cleaned regularly in order to
maintain the suction power.
1
Remove the dust bin from the appliance, >”Emp-
tying the dust bin” on page 18.
2
Unscrew the dust
bin cover in the anti-clockwise direction and lift it o
(Fig.
15
).
3
Remove the pre-motor lter (Fig.
16
).
4
Release the separator cover by turning it in the
clockwise direction (Fig.
17
).
5
Remove the cover
from the separator (Fig.
18
).
6
Remove the separator
and dispose of the content in a waste bin (Fig.
19
).
7
Rinse the pre-motor lter and the separator
out thoroughly under running water.
8
Leave the
cleaned parts to dry completely for at least 24 h.
9
Insert the separator cover into the separator.
10
Secure the separator cover by turning it in the an-
ti-clockwise direction (Fig.
17
).
11
Insert the separa-
tor, together with the separator cover, into the dust
bin (Fig.
20
).
12
Place the pre-motor lter on the
dust bin (Fig.
21
).
13
Screw the dust bin cover onto
the dust bin by turning it in the clockwise direction.
14
Re-insert the dust bin into its console on the ap-
pliance body. You must be able to feel the dust bin
click into place.
Cleaning the exhaust lter
CAUTION!
The ne ns on the exhaust lter are sensitive.
Never clean the ns with water and only ever use
soft brushes for cleaning.
NOTE:
Replace any damaged, discoloured or deformed
exhaust lters with new ones.
1
Screw the exhaust lter cover in the anti-clock-
wise direction and remove it from its console on the
appliance body (Fig.
22
).
2
Remove the exhaust l-
ter (Fig.
23
).
3
Carefully tap out the exhaust lter.
4
Carefully clean the exhaust lter with a soft brush.
5
Re-insert the exhaust lter into its console on the
appliance.
6
Ret the exhaust lter cover.
7
Secure
the exhaust lter cover by turning it in the clockwise
direction.
Cleaning the mini turbo nozzle
1
Disconnect the mini turbo nozzle from the suc-
tion hose or the telescopic tube.
2
Push the circlip
o upwards (Fig.
24
).
3
Carefully open up the appli-
ance top of the mini turbo nozzle (Fig.
25
).
4
Thor-
oughly clean the brush by hand. In case of stubborn
soiling, carefully use tweezers or scissors (Fig.
26
).
5
Place the appliance top on the 4 tabs on the appli-
ance bottom and then carefully close the appliance
top (Fig.
27
).
6
Push the circlip back on.
Accessories
Filter set (1 pre-motor lter, 1 exhaust lter) –
2620001 (Fig.
28
/A)
• 1 Long exible crevice nozzle – M232 (Fig.
28
/B)
• 1 Mini turbo nozzle "Fellino" – M219 (Fig.
28
/C)
• 1 Parquet brush – M203-5 (Fig.
28
/D)
Troubleshooting
Before you contact our customer service department
or send the appliance to the Dirt Devil customer ser-
vice department, you will nd a lot of additional in-
formation in the service area of our website which
will help you solve problems.
www.dirtdevil.de/service
WARNING!
Switch o the appliance before you start trouble-
shooting. Never use a faulty appliance.
!
18
EN
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil Pick Up DD2650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil Pick Up DD2650 in the language / languages: All languages as an attachment in your email.

The manual is 6,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info