665110

Dirt Devil Pick Up DD2650 Manual

13
Zoom out
Zoom in
Previous page
1/146
Next page
Preparatory work
Getting to know the appliance
Fig.
1
:
1
dust bin;
2
cord rewind button;
3
ex-
haust lter cover;
4
suction hose connection;
5
dust bin release;
6
dust bin handle;
7
dust
bin cover;
8
ON/OFF button;
9
parking brack-
et;
10
connection cord;
11
suction hose;
12
handle;
13
bypass vent;
14
suction hose release;
15
telescop-
ic tube;
16
telescopic tube release catch;
17
accesso-
ry bracket;
18
switchable oor nozzle;
19
crevice noz-
zle;
20
furniture brush;
21
mini turbo nozzle
Unpacking and assembling
1
Check that the unpackaged contents are com-
plete. If you notice any transport damage or if an-
ything is missing, contact your dealer immediate-
ly.
2
Connect suction hose and appliance (Fig.
2
).
3
Connect the suction hose with the telescopic tube
and adjust the length of the telescopic tube (Fig.
3
).
4
Connect telescopic tube and switchable oor noz-
zle (Fig.
4
).
5
Ensure that the bypass vent (Fig.
1
/
13
)
is completely closed.
Using the accessories
CAUTION!
For hard oors, only use the switchable oor
nozzle (Fig.
1
/
18
) with the brush (Fig.
10
) ex-
tended, as the hard oor may otherwise become
damaged.
CAUTION!
If using the turbo nozzle (Fig.
1
/
21
), make sure
that the surface can withstand the rotating brush
without becoming damaged.
NOTE:
You can also use the suction nozzles without the
telescopic tube as necessary. To do so, connect
the required accessories directly to the handle
(Fig.
9
).
1
Connect the required accessory to the handle or
the telescopic tube (Fig.
9
).
2
Make sure that the
accessory is securely connected. ➔ The appliance
can be connected.
Connecting the appliance
CAUTION!
If the red marking is visible (Fig.
6
/
1
), retract
the connection cord by pressing the cord rewind
button to pull in the cord up to the yellow mark
(Fig.
6
/
2
) (Fig.
7
). Otherwise, the connection
cord might be damaged.
1
Pull the cable out of the appliance (Fig.
5
).
2
In-
sert the plug into a mains socket.
Vacuum cleaning
Flexible vacuum-cleaning
1
Connect the required accessories >”Using the ac-
cessories” on page 17.
2
Connect the appliance
>”Connecting the appliance” on page 17.
3
To switch
on the appliance, press the ON/OFF button (Fig.
8
).
➔ The appliance vacuums at full suction pow-
er.
4
To reduce the suction power, open the by-
pass vent as required >”Regulating the suction pow-
er” on page 17.
5
To switch o the appliance, press
the ON/OFF button again (Fig.
8
). ➔ The appliance
switches o.
6
Close the bypass vent (Fig.
1
/
13
) so
that the appliance operates with full suction power
when vacuum-cleaning the next time.
Regulating the suction power
1
To reduce the suction power, slide the bypass vent
open (Fig.
11
).
2
To increase the suction power, slide
the bypass vent closed again (Fig.
11
).
Storing the appliance
NOTE:
If necessary, use the accessories mount (Fig.
1
/
17
)
to attach 2 accessories.
1
Switch o the appliance and pull the plug from the
socket.
2
Push the cord rewind button (Fig.
1
/
2
)
until the cord has been fully rewound (Fig.
7
).
3
Hang the telescopic oor nozzle or parquet nozzle
(connected to the telescopic tube or handle) in the
parking bracket (Fig.
1
/
9
) (Fig.
12
).
EN
17
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil Pick Up DD2650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil Pick Up DD2650 in the language / languages: All languages as an attachment in your email.

The manual is 6,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info