Manual Dirt Devil M3220 (page 14 of 50) (Dutch, Italian, Turkish, Spanish)

500146

Zoom out

Zoom in

1/50

5 Maintenance

5.1 Emptying the dust container

 It is best to empty the dust container after each vacuuming session.

 Empty the dust container at the latest:

- if the cleaning indicator (Fig. 8/A1) lights up;

- if the "MAX" marking (Fig. 8/B1) has been reached; or

- before prolonged storage or dispatch.

1. Switch off the appliance, Chapter 4.3, "Switching off".

2. Press the release catch for the dust container (Fig. 8/A2) and remove

the dust container from its bracket.

3. Empty the dust container by holding it low over a dustbin and only then

press the release button (Fig. 8/B).

4. If the dust container can no longer be completely cleaned by simply

opening the bottom, the cyclone unit has to be removed, Chapter 5.2,

"Cleaning dust container and motor protection filter".

5.2 Cleaning dust container and motor protection filter

 It is best to check the motor protection filter each time you empty the

dust container, Chapter 5.1, "Emptying the dust container".

 Clean the motor protection filter at the latest when the cleaning indica-

tor (Fig. 8/A1) lights up.

1. Switch off the appliance, remove the dust container and empty it,

Chapter 5.1, "Emptying the dust container".

2. Release the dust container cover by firmly turning it in the direction of

the arrow (Fig. 9/A). Remove it from the dust container.

3. Pull the dual motor protection filter up and out of the dust container

(Fig. 9/B).

4. Take the cyclone unit up out of the dust container (Fig. 9/C).

5. Remove any residual dust still clinging to the dust container and cy-

clone unit using a dry cloth or a soft brush, e.g. the supplied furniture

brush.

6. Hold the dual motor protection filter low over a dustbin. Separate the fil-

ter elements from one another. Remove larger agglomerations of dirt

by hand.

7. Remove the small motor protection filter from its bracket (Fig. 10/A).

8. If the 3 motor protection filter elements are still dirty, thoroughly rinse

them by hand until all dirt is gone.

9. If one of the filter elements is damaged, replace it with a new one

(Chapter 5.4, "Spare parts and accessories").

10. Put the small motor protection filter back into its bracket (Fig. 10/A).

11. Put the cyclone unit back into the dust container (Fig. 10/B). Take care

that the two wide tabs and the narrow tab engage in the wide grooves

and the small groove, respectively.

12. Reassemble the dual motor protection filter and put it back onto the cy-

clone unit (Fig. 11/A).

13. Put the dust container cover back on (Fig. 11/B). Take care that the two

wide tabs and the narrow tab engage in the wide grooves and the small

groove, respectively.

14. Lock the cover by turning it firmly in the direction of the arrow (Fig. 11/

C) until it clicks into place.

ATTENTION:

Switch off the appliance before emptying the dust container. This will

prevent dust from damaging the appliance.

MAX

NOTE:

You can dispose of the contents of the dust container with your regular

domestic waste as long as it does not contain any substances not per-

mitted in domestic waste.

ATTENTION:

The dust container and the filter elements are washable, but may not be

cleaned in dishwashers or washing-machines. Also, do not use deter-

gents or brushes with hard bristles to clean them.

ATTENTION:

Refrain from cleaning the cyclone unit with water. Otherwise, adhering

dirt particles may clog the cyclone unit.

ATTENTION:

Let the filters dry for approx 24 hours at room temperature after clean-

ing. Only put them back into the appliance when they are completely dry.

M3220.book Seite 14 Montag, 4. Juni 2012 3:15 15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil M3220 in the language / languages: Dutch, Italian, Turkish, Spanish as an attachment in your email.

The manual is 11,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dirt Devil M3220

Dirt Devil M3220 User Manual - English, German, French - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dirt Devil M3220 Manual

Product: