500172

Dirt Devil M 7066 Cargo Manual

13
Zoom out
Zoom in
Previous page
1/24
Next page
13
GB
4Use
4.1 Operational safety
4.2 Vacuum cleaning
1. Pull out the cord by the plug up to the yellow mark (Fig. 6/1).
2. Insert the mains plug into a socket with ground/safety contact.
3. Switch on the cylinder vacuum cleaner with the on/off switch (Fig. 6/4).
4. Set the suction power using the suction power control (Fig. 6/5) to suit
the type of floor to be cleaned.
- Z ‘max’: for deep- and short-pile carpets, runners, etc.
- Z ‘min’: for smooth floors, e.g. parquet, tiles, PVC, etc.
5. If using the floor nozzle, set the ‘carpet/hard floor’ selector according to
the type of floor to be cleaned (Fig. 7/1):
- Fig. 7/A: for deep- and short-pile carpets, runners, etc.
- Fig. 7/B: for hard floors, e.g. parquet, tiles, PVC, etc.
6. When working with the vacuum cleaner, pull it after you like a sleigh.
4.3 Switching off
1. Switch off the cylinder vacuum cleaner with the on/off switch (Fig. 6/4)
and pull the plug from the mains socket.
2. Keep the plug in your hand.
3. To retract the power cord, push the cord retracting button (Fig. 6/3).
4.4 Transport and storage
Carry the cylinder vacuum cleaner by the carrying-handle (Fig. 8/A1) or
by the recessed handle (Fig. 8/B1).
For storage you may either
- park the telescopic tube using the parking-hook of the floor nozzle
(Fig. 8/A)
- or store it using the storage hook (Fig. 8/B).
If you want to store the appliance for a prolonged period, remove the
dust filter bag ZChapter 5.1, ‘Changing the dust filter bag’ and dispose of
it properly. Store the appliance in a cool, dry place, out of the reach of chil-
dren.
WARNING:
Danger of injury! Check appliance and power cord before each use. A
damaged appliance must never be used.
WARNING:
Danger of injury! Especially when vacuum-cleaning stairs make sure
that you always stand on a higher level than the appliance.
ATTENTION:
Only use the cylinder vacuum cleaner when all filters are intact, dry and
correctly fitted. Make sure that no objects obstruct the tube, the suction
hose or other openings.
ATTENTION:
Before vacuuming, make sure that the fitted nozzle suits the surface to
be cleaned. Also observe the flooring manufacturer's recommenda-
tions.
NOTE:
Your cylinder vacuum cleaner is equipped with a safety switch to prevent
overheating. It will switch off automatically if overheated (e.g. due to
clogged suction channels).
If this happens, switch off the appliance, pull the plug, remove the cause
of the overheating (z. B. remove blockage) and then wait about 45 min-
utes. After the appliance has cooled off, you may switch it on again.
6
2
1
4
5
3
6
B
A
1
7
WARNING:
Danger of electric shock! If the red marking (Fig. 6/2) shows, press the
cord retracting button (Fig. 6/3) to pull in the cord up to the yellow mark
(Fig. 6/1). Otherwise, the power cord may be damaged.
NOTE:
In normal situations the bypass vent (Fig. 6/6) must be completely
closed. With the bypass vent you can quickly reduce the suction power,
e.g. to release curtains that have accidentally been sucked in.
WARNING:
Danger of injury! During uncontrolled retraction, the power cord can whip
around, become a tripping hazard or knock over objects. Therefore,
keep the plug in your hand and guide the cord when retracting it.
B
A
1
1
8
ATTENTION:
Never store the appliance next to heat sources (e.g. stoves or radiators).
Avoid exposing it to direct sunlight. Heat can damage the appliance.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil M 7066 Cargo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil M 7066 Cargo in the language / languages: English, German, French as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info