320859

Dirt Devil m 2730 0 centrino x3 Manual

10
Zoom out
Zoom in
Previous page
1/18
Next page
10
Maintenance
3 Maintenance
3.1 Emptying the dust container
Empty the dust container after every
cleaning session in order to maintain the
suction power of your cylinder vacuum cleaner.
Empty the dust container at the latest when
the "MAX" mark (Fig. 8/1./1) has been reached
or the cleaning indicator (Fig. 1/6) is showing in
the display window.
1. Unlatch the dust container by swaying its
retaining bracket upwards (Fig. 8/1.).
2. Then remove the dust container from its
mounting (Fig. 8/2.).
3. Empty the dust container by holding it low
over a dust bin and only then open the
bottom plate (Fig. 9/1).
4. At this occasion remove the cyclone unit by
turning it counter-clockwise (Fig. 9/2) and
clean it.
5. Remove any dust that may have collected
in the dust compartment.
6. Replace the cyclone unit by turning it
clockwise (Fig. 9/2).
7. Fold the bottom plate back up. It will click
into place audibly.
8. Also clean or exchange the dual motor
protection filter on this occasion. ZChapter
3.4, "Cleaning / changing the dual motor
protection filter".
9. Put the dust container back into its holder.
You must feel and hear it clicking into place.
3.2 Changing filters
Dust and dirt particles can fix themselves to
the filters and reduce the airflow. Adhere to the
cleaning and changing intervals indicated
below.
Replace a damaged filter without delay.
The following filters are installed:
Dual motor protection filter (Fig. 10/1)
- Checking/cleaning: To maintain suction
power check the dual motor
protection filter after each vacuum
cleaning session. If the dual motor
protection filter is slightly dirty, it is
sufficient to pat out the dust. If it is heavily
soiled it must be thoroughly cleaned and
washed (ZChapter 3.4, "Cleaning /
changing the dual motor protection
filter").
- Changing: If the filter elements are too
dirty or it is no longer possible to clean
them, replace them with new filter
elements (ZChapter 5.1, "Consumable
parts").
Exhaust filter (Fig. 10/2)
- Cleaning: depending on the degree of
soiling, but at least once per month
- Changing: every 6 months
3.3 Changing the exhaust filter
1. Switch off the appliance (ZChapter 2.4,
"Switching off").
2. Reach under the exhaust filter cover and
fold it upwards (Fig. 11/1).
3. Remove the exhaust filter (Fig. 11/2).
4. Pat the dust out of the exhaust filter. If it
cannot be sufficiently cleaned in this
manner, wash it thoroughly by hand and let
it dry for at least 15 hours before replacing
it into the appliance.
5. Put the cleaned or new hygienic exhaust
filter (ZChapter 5, "Spare parts") back into
its holder.
6. Set the exhaust filter cover into the back
end first and then fold it down until you can
feel and hear it clicking into place.
3.4 Cleaning / changing the dual
motor protection filter
1. Switch off the appliance, remove the dust
container and empty it ZChapter 3.1,
"Emptying the dust container".
2. First pull the motor protection filter cassette
out of its holder by the tab provided
(Fig. 12/1).
3. Then remove the motor protection filter
element (Fig. 12/2).
4. For a rough cleaning, tap against both parts
of the dual motor protection filter lightly from
all sides.
5. Put the motor protection filter element into
its holder in the correct position (Fig. 14/1).
6. Put the motor protection filter cassette into
its holder in the correct position (Fig. 14/2,
with the arrow pointing upwards). Push the
cassette back firmly from all sides and
check that it fits properly.
7. Replace the dust container It must catch
with an audible click. Check that the
container is firmly fitted before restarting
the appliance.
ATTENTION:
Switch off the appliance before emptying the
dust container (ZChapter 2.4, "Switching
off"). In this way, you will prevent dust from
damaging the appliance.
NOTE:
You can dispose of the contents of the dust
container with your regular domestic trash if
it contains no waste materials prohibited in
domestic trash.
MAX
8
9
10
1. 2.
11
NOTE:
If both parts of the dual motor protection filter
are extremely dirty, rinse them thoroughly
with a shower head (Fig. 13/1). Do not use a
brush or cleansers for this. Then leave the
filter element to dry (approx. 15 hrs at room
temperature, Fig. 13/2). Only put them back
into the appliance when they are completely
dry.
12
13
14
CentrinoX3.book Seite 10 Dienstag, 15. März 2011 10:07 22
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil m 2730 0 centrino x3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil m 2730 0 centrino x3 in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info