319887
29
Zoom out
Zoom in
Previous page
1/60
Next page
29
2 Assembly
GB
Proceed as follows to fit on the nozzles:
1. Switch the appliance off and pull the plug out of the
socket.
2. Remove the nozzle from the telescopic tube (Fig. 10/1).
3. Attach the desired nozzle to the lower end of the tele-
scopic tube (Fig. 10/1) or directly to the handle.
(Fig. 11/1).
4. If possible, store nozzles no longer in use on the acces-
sory bracket as shown.
- Insert the 2-in-1 combi nozzle into the accessory
bracket (Fig. 13/a).
- Push the crevice nozzle onto the accessory bracket
and fold it down until you feel and hear it snap into
place (Fig. 13/b).
5. Keep the other nozzles safe and inaccessible to chil-
dren.
WARNING:
Danger of injury! Only mount the nozzles if the plug has
been removed from thesocket. The appliance could be
switched on accidentally.
ATTENTION:
Using the vacuum cleaner without a nozzle attached
increases the danger of accidentally sucking in objects.
ATTENTION:
Our (mini) turbo brush can only be used to vacuum
surfaces that are not sensitive. Do not clean any floors
or objects with the (mini) turbo brush that you would not
clean without a second thought with a conventional
brush. Therefore, do not clean sensitive or polished floor
surfaces with the (mini) turbo brush. Nor should you
clean furniture, sensitive carpets, upholstery, covers, or
any material with a sensitive texture with the (mini) turbo
brush. Otherwise material damage might occur. If in
doubt, refrain from using the (mini) turbo brush. In every
instance observe the instructions for care and cleaning of
the respective manufacturer.
NOTE:
If you want to use the mini turbo brush, you must first
attach the supplied adapter (Fig. 12/*) on the telescopic
tube or on the handle (Fig. 12/1). This is described in
detail in the instruction sheet for the mini turbo brush or
the pet hair turbo brush.
Fig. 10
1
Fig. 11
1
Fig. 12
1
*
Fig. 13
a
b
02_Infinity V12_gb.book Seite 29 Freitag, 22. Juli 2011 12:10 12
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil infinity m5010 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil infinity m5010 1 in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info