665119
18
Zoom out
Zoom in
Previous page
1/151
Next page
EN
18
Vacuuming oors
1
Unfasten the stop catch on the oor nozzle by pla-
cing your foot on the oor nozzle and tilting the ap-
pliance backwards with the handle.
2
Switch on the
appliance with the desired suction power > “Switching
the appliance on/o on page 17.
3
Vacuum-clean
the oor.
NOTE:
If the brush roller (Fig.
1
/
7
, Fig.
26
) becomes
blocked as a result of soiling, the appliance
switches o and the LED (Fig.
1
/
3
) ashes red.
To be able to use the appliance again, push the
OFF/MIN/MAX all the way up (Fig.
15
/O) and clean
the brush roller > “Removing and cleaning the
brush roller” on page 18.
4
Switch o the appliance.
Maintaining the appliance
Removing the rechargeable battery
1
Push the rechargeable battery compartment re-
lease catch (Fig.
1
/
10
) and remove the rechargeable
battery compartment cover (Fig.
1
/
9
).
2
Remove
the rechargeable battery from the appliance.
Emptying the dust bin
1
Press the dust bin release catch (Fig.
16
) and re-
move the dust bin from the appliance (Fig.
17
).
2
Re-
move the separator with the lter from the dust bin
(Fig.
18
).
3
Dispose of the contents of the dust bin
in a waste bin. Gently tap out the dust bin to remove
any soiling.
Cleaning the separator and lter
NOTE:
The appliance and the lter should be cleaned
regularly in order to maintain the suction power.
1
Remove the dust bin from the appliance and the
separator with the lter from the dust bin > “Empty-
ing the dust bin on page 18.
2
Turn the lter cover
anti-clockwise to release the catch (Fig.
19
/
A
) and
remove the lter cover (Fig.
20
/
1
) from the separa-
tor (Fig.
20
/
3
).
3
Pull on the tab to remove the pre-
motor lter from the separator (Fig.
20
/
2
).
4
Tap
out the separator over a waste bin. Use a dry cloth to
remove any remaining dust and dirt.
5
Remove the
second pre-motor lter from the appliance body
(Fig.
21
).
6
Rinse out the pre-motor lters under run-
ning water (max. 40 °C). Leave the pre-motor lters to
dry for at least 24 hours.
7
Reinsert one pre- motor
lter into appliance body (Fig.
21
) and the other
pre-motor lter into separator with tab facing up.
8
Place the lter cover on the separator and turn it
clockwise to lock it in place (Fig.
19
/
B
).
9
Re-insert
the separator with the pre-motor lter into the dust
bin (Fig.
22
).
10
Re-insert the dust bin into the appli-
ance and push it into the appliance so that you hear
and feel it click into place (Fig.
23
).
Removing and cleaning the brush roller
1
Switch o the appliance and set it down so that
the brush roller is easily accessible and the appliance
rests safely in place.
2
Turn the roll catch anti-clock-
wise using a small coin (Fig.
24
) and remove the lock-
ing cover (Fig.
25
).
3
Raise the brush roller at the side
of the roll catch and remove it from the oor nozzle
(Fig.
26
).
4
Remove any dirt and hairs from the oor
nozzle and from the brush roller. If necessary, you can
carefully use a pair of scissors as an aid.
5
Insert the
brush roller into the oor nozzle with the round end
rst (Fig.
27
).
6
Fit the locking cover and turn the roll
catch clockwise.
Accessories
Pre-motor lter (2x) – 0691002 (Fig.
28
/A)
Power adapter DD691 – 0691003 (Fig.
28
/B)
Power adapter DD692 – 0692003 (Fig.
28
/B)
Rechargeable battery DD691-1/18V – 0691004
(Fig.
28
/C)
Rechargeable battery DD692-1/32V – 0692004
(Fig.
28
/C)
Brush roller – 0691013 (Fig.
28
/D)
Wall mount – 0691011 (Fig.
28
/E)
Troubleshooting
Before you contact our customer service department
or send the appliance to the Dirt Devil customer
service department, you will nd a lot of additional
information in the service area of our website which
will help you solve problems.
www.dirtdevil.de/service
WARNING!
Switch o the appliance before you start trouble-
shooting. Never use a faulty appliance, charger or
rechargeable battery.
!
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil DD691 Renegade at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil DD691 Renegade in the language / languages: All languages as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info